Skip to content

Tronxy X5SA/X5ST/Pro/2E 500mm

The Tronxy X5SA/X5ST/Pro/2E 500mm is an FDM 3D printer from Tronxy with a 500 x 500 x 600 mm build volume.

The Tronxy X5SA/X5ST/Pro/2E 500mm is an FDM 3D printer from Tronxy with a 500 x 500 x 600 mm build volume.

Calibration

  • Start with a complete mechanical square-up before any electronic tuning.

Action: Power off the printer and inspect the entire CoreXY frame for squareness, then tighten all extrusion joints, gantry fasteners, wheel/rail interfaces, and base-frame screws in a systematic pattern. Check that both Z lead screws rise and fall evenly by hand, and verify the gantry is not twisted relative to the bed plane.

Common defects

  • Hotend temperature instability and clogging risk

Symptoms: Nozzle temperature oscillates by several degrees, extrusion becomes inconsistent, or the hotend clogs during a print, especially with PETG or other temperature-sensitive materials. One reviewer explicitly reported fluctuating temperatures and a clog after a temperature drop on the X5SA platform.

ManufacturerTronxy
TechnologyFDM
Classhobby
Build volume500 x 500 x 600 mm
Auto levellingno
Compatible materialspla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood

Specifications

ManufacturerTronxy
TechnologyFDM
Classhobby
Build volume500 x 500 x 600 mm
Auto levellingno

Compared with 3 similar

same class and kinematics, close in price within 30 percent

ModelClassBuild volume
Tronxy X5SA/X5ST/Pro/2E 500mm (this)hobby500 x 500 x 600 mm
Creasee CS50s Prohobby500 x 500 x 600 mm
LNL3D D5hobby500 x 500 x 600 mm
Modix V3 BIG-40hobby400 x 400 x 800 mm

Compatible materials and print settings

MaterialNozzle temperatureBed temperature
PLA210-230 °C55-65 °C
PETG230-265 °C70-85 °C
TPU220-240 °C35-55 °C
PVA220-240 °C45-65 °C
Matte PLASilk PLAGlow PLAWood Composite