The Anet A8 Plus is an FDM 3D printer from Anet with a 300 x 300 x 350 mm build volume.
The Anet A8 Plus is an FDM 3D printer from Anet with a 300 x 300 x 350 mm build volume.
Action: Assemble or re-check the aluminum extrusion frame so the uprights are plumb, the top beam is not twisted, and all corner joints are tightened evenly. Confirm that the gantry moves smoothly across the full X and Y travel without binding, and that the bed carriage rolls without rocking.
The Anet A8 Plus is best understood as a budget large-format open-frame printer with capable mechanics but conservative electronics and setup quality. Most problems reported around this platform are not catastrophic design failures; they are the usual consequences of a low-cost kit-style machine that depends heavily on assembly quality, calibration discipline, and user maintenance.
| Manufacturer | Anet |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 350 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Anet |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 350 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Anet A8 Plus (this) | hobby | 300 x 300 x 350 mm |
| Anycubic Kobra Plus | hobby | 300 x 300 x 350 mm |
| Koonovo KN3 Idex | hobby | 300 x 300 x 350 mm |
| LNL3D D3 | hobby | 300 x 300 x 350 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |