Volumic Stream30Ultra SC

The Volumic Stream30Ultra SC is an FDM 3D printer from Volumic with a 300 x 200 x 300 mm build volume.

Specifications

The Volumic Stream30Ultra SC ("Supercharged") is a high-performance, industrial-grade FDM (Fused Deposition Modeling) 3D printer manufactured in France by Volumic. Positioned as a heavy-duty workhorse, the "SC" variant represents a mechanical and thermal evolution of the original Stream30Ultra, optimized for continuous 24/7 industrial production of functional components using high-temperature, engineering-grade materials. The key focus of the SC series is on increasing print head fluidity, improving extrusion torque, and minimizing long-term maintenance cycles.

Kinematic Assembly and Frame Rigidity.

Calibration

Follow this 8-step calibration guide to configure the Volumic Stream30Ultra SC for high-temperature industrial materials.

• Build Plate Preparation

Oil from fingertips, dust, and adhesive residue are the main causes of bed adhesion failure. Wipe the PEI surface with Isopropyl Alcohol (IPA) of at least 99% concentration while the bed is cool . Use a clean, lint-free microfiber cloth [11, 12].

• Expected result: A clean, grease-free surface that ensures optimal first-layer adhesion.

Common defects

• Hardware defects and mechanical weaknesses
• Z-Endstop Damage from Bed Over-Tightening: The mechanical microswitch for Z-homing is located near the bed leveling screws. If a user applies excessive torque while adjusting the bed, the metal switch arm can become bent or compressed. On the SC model, the high-torque Z-motors can drive the nozzle into the bed with high force if the switch fails, potentially bending the Z lead screws or linear shafts.

What it is used for

Best Use-Cases

• Medical-Grade PEEK Implants: Nozzle temperatures up to 420°C allow the production of PEEK implants, orthotics, and surgical guides that can undergo steam autoclave sterilization [5, 7].
• Aerospace Components: Manufacturing brackets, electronics enclosures, and cable routing trays using ULTEM (PEI) that comply with FAR 25.853 flame retardancy standards.