Skip to content

Goofoo Gemini

The Goofoo Gemini is an FDM 3D printer from Goofoo with a 360 x 250 x 200 mm build volume.

The Goofoo Gemini is an FDM 3D printer from Goofoo with a 360 x 250 x 200 mm build volume.

Calibration

  • Start with a strict machine-state inspection before any leveling or extrusion test.

Action: Power the Gemini on with no filament loaded, verify that the gantry moves freely across X/Y without binding, and confirm that the Bowden tube is seated cleanly at both ends with no visible kinks, crushed PTFE, or loose pneumatic fittings.

Common defects

  • No verified integrated auto-leveling system
  • Symptoms: Uneven first layers, corner lifting, one side of the bed printing too close while another side prints too far, and recurring adhesion failures after transport or nozzle changes.
  • Likely cause: The Gemini is explicitly listed with manual leveling, and no probe-based compensation is verified in the source set.
ManufacturerGoofoo
TechnologyFDM
Classhobby
Build volume360 x 250 x 200 mm
Auto levellingno
Compatible materialspla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood

Specifications

ManufacturerGoofoo
TechnologyFDM
Classhobby
Build volume360 x 250 x 200 mm
Auto levellingno

Compared with 3 similar

same class and kinematics, close in price within 30 percent

ModelClassBuild volumePrice (EUR)
Goofoo Gemini (this)hobby360 x 250 x 200 mm
Renkforce Pro7 Dualhobby360 x 250 x 200 mm3000
Sovol SV04 Copy Modehobby150 x 300 x 400 mm
Sovol SV04 Mirror Modehobby150 x 300 x 400 mm

Compatible materials and print settings

MaterialNozzle temperatureBed temperature
PLA210-230 °C55-65 °C
PETG230-265 °C70-85 °C
TPU220-240 °C35-55 °C
PVA220-240 °C45-65 °C
Matte PLASilk PLAGlow PLAWood Composite