Skip to content
EduFacturing

UnionTech Lite600

The UnionTech Lite600 is an SLA 3D printer from UnionTech with a 600 x 600 x 400 mm build volume.

The UnionTech Lite600 is an SLA 3D printer from UnionTech with a 600 x 600 x 400 mm build volume.

Specifications

UnionTech Lite600, Technical Specifications

Build Volume

600 × 600 × 400 mm, large enough for full-scale automotive body panels, dense nests of smaller parts, or entire footwear sole collections in a single run.

Laser Source

355 nm solid-state Nd:YVO₄ laser with adjustable power. The 355 nm wavelength provides high photochemical efficiency with standard epoxy and acrylic SLA resins.

Optics and Scanner

Dynamic galvanometer scanning system with AI-powered automatic self-calibration: a key advantage during long unattended production runs, as the system compensates for thermal drift without manual intervention.

Layer Thickness

Adjustable from 0.05 to 0.25 mm (50-250 µm).

Calibration

Calibration of UnionTech Lite600

  • AI Galvanometer Calibration: launch the built-in automatic procedure from the control panel. The system measures deviations at 25+ control points and applies a correction table. Expected result: correction under ±0.05 mm. Tip: run after every resin change and when ambient temperature shifts by more than 5 °C.
  • Platform Leveling: mechanical adjustment via four support points using a feeler gauge or dial indicator.

Common defects

Common Defects on UnionTech Lite600

Layer Shift

Symptom: stepped horizontal displacements along part walls. Cause: mechanical vibration of the scanner head, loose Z-axis belts, or floor vibrations. Fix: check all mechanical fasteners, isolate the machine from vibrations, reduce scan speed.

Suction Deformation

Symptom: deformation or detachment of wide horizontal sections. Cause: vacuum effect during platform lift.

What it is used for

Applications of UnionTech Lite600

Suitable Applications:

  • Automotive industry: full-scale prototypes of exterior and interior components, tooling, and assembly checks: all in one build thanks to the 600 mm working area.
  • Footwear and casting industry: batch production of shoe lasts and casting patterns: a primary application of UnionTech machines across Asia.
ManufacturerUnionTech
TechnologySLA
Classindustrial
Build volume600 x 600 x 400 mm
Layer height50-250 µm
Kinematicsgantry
Enclosureactive
Auto levellingno
Price60 000 EUR
Compatible materialsstandard-resin, water-wash-resin, tough-resin, flex-resin, castable-resin, dental-resin, high-temp-resin

Reference price

Price (EUR)60 000 EUR
NoteReference from the database; no market source or date.

Specifications

ManufacturerUnionTech
TechnologySLA
Classindustrial
Build volume600 x 600 x 400 mm
Layer height50-250 µm
Kinematicsgantry
Auto levellingno

Compared with 3 similar

same class and kinematics, close in price within 30 percent

ModelClassKinematicsBuild volumePrice (EUR)
UnionTech Lite600 (this)industrialgantry600 x 600 x 400 mm60000
Eplus3D EP-A450industrialgantry450 x 450 x 350 mm60000
Kings 3D SLA 450 Proindustrialgantry450 x 450 x 350 mm55000
Stratasys Neo450eindustrialgantry450 x 450 x 400 mm55000

Compatible materials and print settings

Material
Standard Resin
Water-Washable Resin
Tough Resin
Flexible Resin
Castable Resin
Dental Resin
High-Temp Resin