The Two Trees Bluer Plus is an FDM 3D printer from Two with a 300 x 300 x 400 mm build volume.
The Two Trees Bluer Plus is an FDM 3D printer from Two with a 300 x 300 x 400 mm build volume.
Action: Power off the printer, then inspect the frame, gantry, belt path, bed carriage, and Z synchronization hardware. Confirm that the machine is square, the V-wheels move without binding, the belts are taut but not over-tight, and the dual Z columns rise at the same rate when moved by hand or by short jog commands.
Symptom: Users report that some units work well immediately, while others need mechanical correction, squaring, or fastener rework before producing consistent prints.
Cause: Review coverage explicitly questions QC on this model, and the machine is semi-assembled, which increases the chance of assembly-related variance between units.
The Two Two Trees Bluer Plus is best understood as a large-format, budget-conscious Cartesian FDM printer that prioritizes build volume and practical feature density over premium fit-and-finish. Its strongest advantage is
| Manufacturer | Two |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Two |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Two Trees Bluer Plus (this) | hobby | 300 x 300 x 400 mm |
| Alfawise U20 | hobby | 300 x 300 x 400 mm |
| Anet E10 | hobby | 300 x 300 x 400 mm |
| Anet E12 | hobby | 300 x 300 x 400 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |