The Tronxy XY-3/Pro is an FDM 3D printer from Tronxy with a 300 x 300 x 400 mm build volume.
The Tronxy XY-3/Pro is an FDM 3D printer from Tronxy with a 300 x 300 x 400 mm build volume.
Action: Power off the printer, then inspect the frame for square by checking the verticals, gantry sides, and bed support structure for visible twist. Confirm that the printer sits on a rigid, level table because the XY-3 Pro is a large-format open-frame machine with a 300 × 300 × 400 mm build envelope, so chassis flex or table rocking will show up more strongly than on smaller printers.
Symptoms: Vertical walls lean slightly, tall parts show periodic banding, one side of the gantry seems to rise differently, or the printer exhibits a subtle sway during fast motion.
Causes: The XY-3 Pro is an open-frame, large-volume Cartesian machine, so frame stiffness and Z-axis synchronization matter more than on compact printers. Even a minor chassis twist can become visible over 400 mm of build height.
| Manufacturer | Tronxy |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Tronxy |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Tronxy XY-3/Pro (this) | hobby | 300 x 300 x 400 mm |
| Alfawise U20 | hobby | 300 x 300 x 400 mm |
| Anet E10 | hobby | 300 x 300 x 400 mm |
| Anet E12 | hobby | 300 x 300 x 400 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |