The Forge is an LCD 3D printer from Peopoly with a 288 x 162 x 350 mm build volume.
The Forge is an LCD 3D printer from Peopoly with a 288 x 162 x 350 mm build volume.
Action: Confirm the Forge is fully assembled from its two shipped sections, inspect the interface between the top and bottom halves, tighten all visible fasteners, and ensure the Z assembly moves smoothly through its full travel without binding. Peopoly notes the printer ships in two boxes and takes 30–60 minutes to assemble; no special tools or soldering are required.
Symptoms: There is no extrusion clogging, heat creep, filament grinding, or nozzle wear mode to troubleshoot.
Cause: The Forge is an MSLA/LCD resin printer, not a filament printer.
Solution: Use resin-specific diagnostics instead: exposure tuning, vat film inspection, temperature management, and support strategy.
| Manufacturer | Peopoly |
|---|---|
| Technology | LCD |
| Class | industrial |
| Build volume | 288 x 162 x 350 mm |
| Layer height | 25-200 µm |
| Enclosure | passive |
| Auto levelling | no |
| Price | 15 000 EUR |
| Compatible materials | castable-resin, flex-resin, high-temp-resin, standard-resin, tough-resin, water-wash-resin |
| Price (EUR) | 15000 |
|---|---|
| Date | 2026-06 |
| Note | Reference price in EUR from the EduFacturing database; verify with the retailer. |
| Manufacturer | Peopoly |
|---|---|
| Technology | LCD |
| Class | industrial |
| Build volume | 288 x 162 x 350 mm |
| Layer height | 25-200 µm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume | Price (EUR) |
|---|---|---|---|
| Forge (this) | industrial | 288 x 162 x 350 mm | 15000 |
| Liquid Crystal Pro | prosumer | 450 x 280 x 300 mm | 4500 |
| Form 4 | prosumer | 200 x 125 x 210 mm | 4000 |
| Foto 13.3 | prosumer | 292 x 165 x 400 mm | 1870 |
| Material |
|---|
| Castable Resin |
| Flexible Resin |
| High-Temp Resin |
| Standard Resin |
| Tough Resin |
| Water-Washable Resin |