MP Mini Delta V2

The MP Mini Delta V2 is an FDM 3D printer from Monoprice with a 110 x 110 x 120 mm build volume.

Calibration

• Verify the printer state, build surface, and motion geometry before touching slicer settings.

Action: Power on the printer, confirm the delta arms move smoothly through a homing cycle, inspect the circular bed surface for contamination, and ensure the toolhead is centered without binding.

Common defects

• Tiny build volume limits real-world utility.

Symptoms: Large parts do not fit, assemblies must be split, and support removal can consume a high fraction of the usable space.

Cause: The printer’s delta format and compact footprint constrain the circular build area to roughly 110 mm diameter by 120 mm height, with Monoprice documentation also listing ø100 × 120 mm.