The Geeetech M1 is an FDM 3D printer from Geeetech with a 100 x 110 x 100 mm build volume.
The Geeetech M1 is an FDM 3D printer from Geeetech with a 100 x 110 x 100 mm build volume.
Action: Power on the printer, let the bed and hotend reach operating temperature, and observe whether the machine completes homing cleanly without skipped steps, audible axis binding, or abnormal fan surges. Use a simple calibration model first: a single-layer square, then a 20 mm cube, then a small overhang test.
1. Noise spikes during cooling-fan operation
Symptoms: The printer may sound relatively quiet during some motion phases, but become noticeably loud when the fan ramps up. One reviewer reported readings around 40–43 dBA at 1 m in some conditions, but also reported peaks around 70–75 dB when the fan was active.
Likely causes: Compact fan design, resonant shrouds, high part-cooling airflow, or firmware profiles that drive the fan aggressively at certain layers or materials.
| Manufacturer | Geeetech |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 100 x 110 x 100 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Geeetech |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 100 x 110 x 100 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Geeetech M1 (this) | hobby | 100 x 110 x 100 mm |
| Geeetech M1S | hobby | 100 x 110 x 100 mm |
| Printrbot Simple | hobby | 100 x 100 x 115 mm |
| WEEDO TINA2S | hobby | 100 x 105 x 100 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |