Form 3L

The Form 3L is an SLA 3D printer from Formlabs with a 335 x 200 x 300 mm build volume.

Specifications

The Formlabs Form 3L is a Low Force Stereolithography (LFS) resin 3D printer, meaning that certain specifications typical of FDM printers: such as hotends and nozzles: do not apply [1, 2]. Here are the verified technical specifications based on the provided sources:

• Hotend: Not applicable. The Form 3L uses an optics engine housing two Light Processing Units (LPUs) equipped with 250 mW lasers operating at a 405 nm wavelength [2, 3].
• Bed: The printer utilizes an aluminum build platform where parts are attached during the printing process .
• Chamber: The printer features an air-heated print chamber.

Calibration

The Formlabs Form 3L is a stereolithography (SLA) resin 3D printer, which means it uses a laser to cure liquid resin . Because it is not a Fused Deposition Modeling (FDM) printer, it does not use filament or an extruder . Therefore, FDM-specific calibration steps such as e-steps, flow rate, PID tuning, retraction, and pressure advance do not apply to the Form 3L .