Creasee CS30

The Creasee CS30 is an FDM 3D printer from Creasee with a 300 x 300 x 400 mm build volume.

Specifications

The Creasee CS30 is a large-format FDM (Fused Deposition Modeling) 3D printer employing a Cartesian "bed-slinger" kinematics layout. Designed as the larger sibling to the CS20, the CS30 targets users who require a substantial printing volume: such as for helmets, large enclosures, and architectural prototypes: without the high financial investment of industrial systems. The mechanical architecture is similar to the Creality CR-10 series, featuring an open frame constructed from 2020 and 2040 V-slot aluminum extrusions.

Calibration

Managing a large 300x300 mm heated bed and a 400 mm tall gantry requires precise calibration to handle axis inertia and prevent bed adhesion failures on large prints.

• Carborundum Glass Cleaning and Degreasing: Clean the glass plate with warm water and liquid dish soap to remove grease and oils. Wipe it down with a clean microfiber cloth saturated with 99% Isopropyl Alcohol (IPA) before starting a print.

Common defects

• Hardware defects and mechanical weaknesses
• Tall Gantry Vibrations (Z-Axis Wobble): The tall, single-portal frame lacks upper support braces, leading to mechanical oscillations at print heights above 250 mm during fast print head movements.
• Symptom: Severe ringing, ghosting, and layer shifting on the upper portion of tall prints.
• Solution: Install a diagonal bracing rod kit (Z-brace rods) connecting the top Z-axis frame to the base frame.

What it is used for

Ideal Applications

• Large Cosplay and Decorative Prints: Well-suited for printing helmets, mask elements, and large decorative parts from PLA at moderate speeds.
• Workshop Enclosures and Brackets: Ideal for printing toolboxes, brackets, and fixtures from PETG.