The Artillery Sidewinder X1 is an FDM 3D printer from Artillery with a 300 x 300 x 400 mm build volume.
The Artillery Sidewinder X1 is an FDM 3D printer from Artillery with a 300 x 300 x 400 mm build volume.
Action: Power off the printer and inspect the entire gantry, bed carriage, and cable chain for loose fasteners, belt slack, wheel wear, and bed cable strain. Confirm that the dual Z structure is synchronized visually and that the X carriage rolls smoothly across the V-slot frame without tight spots.
Symptoms: Inconsistent first layers across the bed, edge lift on large prints, and repeated nozzle drag in one area after the opposite corner is tuned correctly.
Cause: The stock machine is described as requiring manual leveling; it does not ship with auto bed leveling in the supplied sources.
| Manufacturer | Artillery |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Artillery |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 400 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Artillery Sidewinder X1 (this) | hobby | 300 x 300 x 400 mm |
| Alfawise U20 | hobby | 300 x 300 x 400 mm |
| Anet E10 | hobby | 300 x 300 x 400 mm |
| Anet E12 | hobby | 300 x 300 x 400 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |