Anet E16

The Anet E16 is an FDM 3D printer from Anet with a 300 x 300 x 400 mm build volume.

Calibration

• Establish the mechanical baseline before touching slicer settings.

Action: Assemble the E16 carefully and verify that the chassis, vertical frame, and system unit are square and rigid before any calibration print. The installation source indicates that the printer is built from three main parts and can be assembled relatively quickly, but large-format printers are much more sensitive to frame squareness than small machines.

Common defects

• Open-frame temperature sensitivity and warping risk

Symptoms: Corners lift on ABS, layer separation appears on tall parts, and prints near the bed edges cool unevenly.

Cause: The E16 is an open-frame, metal-profile printer with a heated bed but no verified enclosure, so ambient drafts can disrupt thermal stability.

What it is used for

• Large single-piece functional prints

The E16’s clearest advantage is its 300 × 300 × 400 mm build volume, which makes it well suited to printing large enclosures, props, organizers, prototypes, and machine parts in one piece rather than joining smaller sections later. This reduces seam lines, assembly labor, and dimensional stack-up.

-