Renkforce Pro 10+

The Renkforce Pro 10+ is an FDM 3D printer from Renkforce with a 360 x 360 x 400 mm build volume.

Specifications

The Renkforce Pro 10+ is a large-format FDM (Fused Deposition Modeling) 3D printer distributed by Conrad Electronic. Designed to appeal to makers, designers, and educators who require substantial print volume without a massive capital outlay, the Pro 10+ occupies a unique spot in the semi-professional market segment. Its heavy frame and direct-drive extrusion system make it a versatile platform for large-scale prototyping.

Build Volume: The standout feature of this machine is its massive build envelope of 360 mm × 360 mm × 400 mm (width, depth, height).

Calibration

Managing the large print surface of the Renkforce Pro 10+ requires careful execution of these calibration steps:

• Magnetic Bed Prep and Cleaning

With a surface area of over 1,200 cm², keeping the print bed free of oils and dust is critical to prevent first-layer failure.

• Step: Remove the flexible print mat and wash it with warm, soapy water. Dry it thoroughly and re-mount it. Before starting a print, wipe the surface down with 99% pure Isopropyl Alcohol (IPA).

Common defects

• Hardware defects and mechanical weaknesses
• Aluminum Bed Warping:
• Symptoms: The nozzle is level at the corners but crashes into the bed or is too high in the center.
• Cause: Large aluminum plates (360x360 mm) can warp under thermal stress when heated above 60°C.
• Solution: Use aluminum foil shims under the magnetic mat to level out low spots, or place a borosilicate glass sheet on top of the bed.
• Bed Cable Fatigue and Failure:.

What it is used for

Best use-cases:

• Large Enclosures and Models: Highly effective for printing large electronic housings, architectural models, and cosplay helmets.
• Flexible TPU Parts: The direct-drive extruder handles flexible filaments well, allowing for large custom gaskets and protective bumpers.