Peopoly Moai

The Peopoly Moai is an FDM 3D printer from Peopoly with a 130 x 130 x 180 mm build volume.

Calibration

• Start with a full mechanical inspection before any resin goes in.

Action: Unbox or open the machine, verify the build platform is clean, confirm the resin vat film is undamaged, and inspect the tilt/release mechanism for smooth motion. On a Moai-class SLA system, the mechanics matter more than “first layer squish” does on FDM, because every layer depends on controlled separation from the vat film.

Common defects

• Manual calibration burden and setup sensitivity

Symptoms: First layers fail on one side, support bases peel inconsistently, or model tilt appears after repeated jobs.

Cause: The Moai is not described as having automatic leveling in the provided sources, and resin systems of this type are sensitive to build-plate alignment and vat geometry.

What it is used for

• Small-to-medium organic models

The Moai is especially well suited to organic forms, figures, busts, display models, and other geometry where smooth surfaces and controlled detail matter more than speed or large footprint.