The Mingda Rock3/Pro is an FDM 3D printer from Mingda with a 320 x 320 x 400 mm build volume.
The Mingda Rock3/Pro is an FDM 3D printer from Mingda with a 320 x 320 x 400 mm build volume.
Action: Power off the printer, loosen nothing unless necessary, and inspect the frame for any obvious shipping shift, especially around the Z towers, X gantry, bed carriage, and the dual-Z synchronization belt. Verify that both Z lead screws rotate freely and that the X gantry sits level across the full width of the printer.
1. Ambiguous firmware and feature set across Rock 3 / Rock 3 Pro variants
Symptoms: Users may see conflicting claims about bed type, power supply rating, or feature availability depending on vendor listing or video source. The materials supplied here are not fully consistent on PSU wattage, and some descriptions blend Rock 3 and Rock 3 Pro terminology.
| Manufacturer | Mingda |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 320 x 320 x 400 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Mingda |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 320 x 320 x 400 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Mingda Rock3/Pro (this) | hobby | 320 x 320 x 400 mm |
| ELEGOO NEPTUNE 3 Plus | hobby | 320 x 320 x 400 mm |
| Geeetech A30 | hobby | 320 x 320 x 400 mm |
| Geeetech MizarMax | hobby | 320 x 320 x 400 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |