Mankati Fullscale XT Plus

The Mankati Fullscale XT Plus is an FDM 3D printer from Mankati with a 260 x 260 x 300 mm build volume.

Calibration

• Verify the machine identity, filament type, and slicer profile before changing any mechanical setting.

Action: Confirm you are working with the Fullscale XT Plus variant, not the base XT, because the Plus model is the 260 × 260 × 300 mm platform with 300°C hotend capability and a 0.4 mm nozzle. In the slicer, start from a profile that assumes 3 mm filament, dual extruders, and a heated bed up to 110°C.

Common defects

• No documented auto-leveling system
• Symptoms: First layers vary across the bed; one side adheres while another side fails; repeated manual leveling is needed after transport or thermal cycling.
• Cause: The provided sources do not list a bed probe or automatic leveling feature, and no auto-leveling claim appears in the spec material.
• Solution: Use careful manual tramming, bed-screw leveling, and a large first-layer test.