The Maker Made 300x is an FDM 3D printer from Maker Made with a 300 x 300 x 300 mm build volume.
The Maker Made 300x is an FDM 3D printer from Maker Made with a 300 x 300 x 300 mm build volume.
Action: Power the machine off, then inspect belt tension, pulley set screws, wheel/rail preload, lead-screw binding if present, and the bed’s magnetic seating. Move each axis by hand through its full travel to feel for tight spots, cable snagging, or frame racking. If the printer uses a build surface that can be removed, verify that it sits flat, fully engaged, and free of debris.
The supplied sources do not provide an official defect bulletin, recall notice, or end-of-life announcement for the MakerMade 300x, so the defect analysis below combines verified source signals with cautious engineering inference from the printer’s documented behavior and community tuning advice. The items below should be treated as likely troubleshooting domains, not confirmed factory defects, unless independently verified on a specific unit.
| Manufacturer | Maker Made |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 300 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Maker Made |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 300 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| Maker Made 300x (this) | hobby | 300 x 300 x 300 mm |
| 3DI D300 | hobby | 300 x 300 x 300 mm |
| Arjun 300 | hobby | 300 x 300 x 300 mm |
| Arjun 300 Mirror | hobby | 300 x 300 x 300 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |