The 3DI D300 is an FDM 3D printer from 3DI with a 300 x 300 x 300 mm build volume.
The 3DI D300 is an FDM 3D printer from 3DI with a 300 x 300 x 300 mm build volume.
Action: Place the printer on a rigid, level surface that does not flex under the machine’s mass, and verify that the powder-coated sheet-metal frame sits without rocking. Confirm that the printer is supplied with stable mains power matching the listed 230 V, 50 Hz, 240 W requirement, because voltage sag and unstable grounding can masquerade as extrusion or leveling problems.
Symptom: Users may expect a built-in camera for remote monitoring, but none is confirmed in the supplied D300 sources.
Cause: The available technical sheet and listing do not document a camera subsystem.
Solution: Treat camera monitoring as an external add-on requirement. If remote observation is needed, use an external IP camera or a workstation webcam rather than assuming onboard support.
| Manufacturer | 3DI |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 300 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | 3DI |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 300 x 300 x 300 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| 3DI D300 (this) | hobby | 300 x 300 x 300 mm |
| Arjun 300 | hobby | 300 x 300 x 300 mm |
| Arjun 300 Mirror | hobby | 300 x 300 x 300 mm |
| Arjun Pro 300 | hobby | 300 x 300 x 300 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |