TAZ 6

The TAZ 6 is an FDM 3D printer from LulzBot with a 280 x 280 x 250 mm build volume.

Specifications

The LulzBot TAZ 6 is a flagship desktop 3D printer representing the prosumer FDM (Fused Deposition Modeling) segment. It was engineered by Aleph Objects with a strong emphasis on reliability, open-source documentation, and premium-grade structural components. Priced at approximately 2,500 EUR/USD at launch, the machine was built to serve as a reliable workhorse for design studios, universities, and makerspaces.

Build Volume: The printer boasts a generous build envelope of 280 mm × 280 mm × 250 mm (11.02" x 11.02" x 9.8").

Calibration

Achieving dimensional precision and consistent extrusion quality on the LulzBot TAZ 6 requires executing these calibration protocols:

• Nozzle Cleaning and Wiper Pad Alignment

The electrical continuity leveling system of the TAZ 6 requires a perfectly clean metal nozzle. Any insulating plastic residue on the tip will prevent the completion of the circuit when probing the washers, resulting in bed crashes.

Common defects

• Hardware defects and mechanical weaknesses
• Failed Auto-Leveling Sequences:
• Symptoms: The print head drives the nozzle hard into the bed during leveling, flexing the frame, and throws a sensor error on the screen.
• Cause: Poor electrical continuity between the nozzle and the washer, typically due to oxidized washers or insulating plastic buildup on the nozzle tip.

What it is used for

Best use-cases:

• Large Functional Prototyping: The 280x280x250 mm build volume combined with a 0.5 mm nozzle is highly efficient for printing enclosures, brackets, and large mechanical mock-ups in PLA or PETG.