The Goofoo T-one is an FDM 3D printer from Goofoo with a 80 x 80 x 80 mm build volume.
The Goofoo T-one is an FDM 3D printer from Goofoo with a 80 x 80 x 80 mm build volume.
Action: Power the machine off, then inspect the enclosure panels, door hinges, cable chains, belts, idlers, lead screws or linear rails, and all visible fasteners. Check that the gantry moves smoothly by hand with power removed, without grinding or sticking. Verify that the extruder carriage is square to the frame and that the bed, if movable, travels without binding.
Symptoms: Users cannot easily confirm exact build volume, nozzle size, chamber temperature behavior, probing system, or firmware features for the T-One from the sources provided here.
Cause: The available material identifies the printer as an enclosed Goofoo filament machine but does not publish a complete technical sheet for this specific model.
| Manufacturer | Goofoo |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 80 x 80 x 80 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | Goofoo |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 80 x 80 x 80 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume | Price (EUR) |
|---|---|---|---|
| Goofoo T-one (this) | hobby | 80 x 80 x 80 mm | |
| Goofoo Cube | hobby | 80 x 80 x 80 mm | |
| Renkforce Cube One | hobby | 80 x 80 x 80 mm | 150 |
| TinyBoy Fabrikator Mini 1.5 | hobby | 80 x 80 x 80 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |