Geeetech I3ProW

The Geeetech I3ProW is an FDM 3D printer from Geeetech with a 200 x 200 x 180 mm build volume.

Calibration

• Start with a full mechanical baseline check before touching slicer values.

Action: Power the printer off, then inspect all frame fasteners, rod clamps, belt anchors, pulley set screws, and the extruder mounting path. Verify that the open-frame acrylic structure is square, that the X/Y/Z rods move without binding, and that the hotend carriage and bed move smoothly across the full travel range.

Common defects

• Manual bed leveling dependence and no documented auto-leveling system: The provided sources do not document auto-bed-leveling for the I3 Pro W, and the machine is presented as a kit-style i3 derivative that relies on manual setup.

Symptoms: First layer is too high on one side, too low on another, or inconsistent after several prints.