Anycubic Kossel Linear Plus

The Anycubic Kossel Linear Plus is an FDM 3D printer from Anycubic with a 230 x 230 x 300 mm build volume.

Calibration

• Establish the printer’s true geometry before chasing slicer settings.

Action: Power on the printer, home all axes, and verify that the delta towers move smoothly without binding. Then print a simple single-wall tower or calibration cube at conservative settings such as 0.20 mm layer height, 30–40 mm/s outer walls, 50–60 mm/s infill, and a moderate nozzle temperature appropriate to the filament.

Common defects

• Geometry sensitivity and difficult calibration: Delta printers are intrinsically more sensitive to tower alignment, arm length equality, endstop consistency, and delta radius tuning than Cartesian machines. On the Kossel platform, users report that leveling and calibration can be difficult, and one review explicitly recommends auto-level or calibration upgrades for better usability.

What it is used for

The Anycubic Kossel Linear Plus is best suited to experienced makers who want a compact delta printer with good motion repeatability, a heated bed, and a relatively fast 60 mm/s-class workflow when tuned properly.