Anycubic i3 Mega S/Pro

The Anycubic i3 Mega S/Pro is an FDM 3D printer from Anycubic with a 210 x 210 x 205 mm build volume.

Calibration

• Establish the printer’s mechanical baseline before touching first-layer settings.

Action: Power on the machine, heat the bed to a moderate PLA temperature, and inspect the frame for wobble, loose fasteners, or carriage play. Confirm that the bed moves smoothly on Y, the gantry moves cleanly on X, and the Z motion rises evenly with no binding.

Common defects

1. Power-loss recovery can be configuration-dependent rather than universally reliable.

Symptoms: After a blackout or intentional power-off test, the printer may not resume exactly as expected, or resume behavior may fail unless the print was started with the correct workflow.