Tronxy XY-2

The Tronxy XY-2 is an FDM 3D printer from Tronxy with a 220 x 220 x 260 mm build volume.

Calibration

• Square the machine mechanically before chasing slicer changes.

Action: Power off the printer, then inspect the frame, gantry, bed carriage, and eccentric V-wheels for play. Tighten any visibly loose frame screws, verify that the X gantry is level relative to the bed, and confirm that the Y bed moves smoothly without rocking. On an open-frame Cartesian printer like the XY-2, tiny mechanical misalignments show up quickly as first-layer inconsistency, corner ringing, or Z banding.

Common defects

• Specification drift between revisions and listings: The provided sources disagree on some headline numbers, including build volume, nozzle temperature, print speed, and even whether the effective print area is 255 × 250 × 260 mm, 255 × 255 × 245 mm, or 255 × 255 × 260 mm. This is usually a sign of revision differences, marketing drift, or measurement rounding rather than a single fixed spec.