The TinyBoy E10/J10/L10/M10 is an FDM 3D printer from TinyBoy with a 10 x 10 x 10 mm build volume.
The TinyBoy E10/J10/L10/M10 is an FDM 3D printer from TinyBoy with a 10 x 10 x 10 mm build volume.
Action: Treat the TinyBoy E10/J10/L10/M10 briefing as a family-level setup until you verify the exact physical machine variant. Record the exact label, controller board, stepper driver type, nozzle diameter, and whether the machine is one of the TinyBoy 2 compact FDM variants or an earlier TinyBoy configuration.
The provided sources do not include a formal defect bulletin, recall notice, or end-of-life announcement for the TinyBoy E10/J10/L10/M10 family. What can be stated reliably is that the documented TinyBoy 2 information is sparse and only verifies a compact single-nozzle PLA-oriented FDM setup with a 0.4 mm nozzle, 1.75 mm filament, and 12V/6A power on the L10 variant.
The verified TinyBoy data point to a small-format, single-nozzle FDM printer optimized for compact builds, educational use, and economical PLA printing rather than large, fast, or multi-material production.
| Manufacturer | TinyBoy |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 10 x 10 x 10 mm |
| Auto levelling | no |
| Compatible materials | pla, petg, tpu, matte-pla, silk-pla, glow-pla, pva, wood |
| Manufacturer | TinyBoy |
|---|---|
| Technology | FDM |
| Class | hobby |
| Build volume | 10 x 10 x 10 mm |
| Auto levelling | no |
same class and kinematics, close in price within 30 percent
| Model | Class | Build volume |
|---|---|---|
| TinyBoy E10/J10/L10/M10 (this) | hobby | 10 x 10 x 10 mm |
| DeltaBot | hobby | 10 x 10 x 11 mm |
| TinyBoy E16/L16/M16 | hobby | 10 x 10 x 16 mm |
| gMax 1.5 Plus | hobby | 16 x 16 x 12 mm |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PLA | 210-230 °C | 55-65 °C |
| PETG | 230-265 °C | 70-85 °C |
| TPU | 220-240 °C | 35-55 °C |
| PVA | 220-240 °C | 45-65 °C |