The F270 is an FDM 3D printer from Stratasys with a 305 x 254 x 305 mm build volume.
The F270 is an FDM 3D printer from Stratasys with a 305 x 254 x 305 mm build volume.
Action: Place the F270 on a rigid, level support structure that can tolerate a 227 kg machine plus consumables, and verify that the rear and side clearances allow ventilation, cable routing, and service access. Confirm the power feed matches either 100–132 VAC / 15 A or 200–240 VAC / 7 A, and confirm the network plan through Ethernet or Wi‑Fi before beginning calibration work.
Symptoms: Users may assume the printer has a slightly larger or smaller usable envelope than expected, leading to edge clipping or conservative underuse of the build area.
Cause: Rounding differences, nominal vs. support-document values, or internal safety margins.
| Manufacturer | Stratasys |
|---|---|
| Technology | FDM |
| Class | industrial |
| Build volume | 305 x 254 x 305 mm |
| Kinematics | bedslinger |
| Auto levelling | yes |
| Price | 35 000 EUR |
| Compatible materials | cf-filled, glow-pla, matte-pla, pa-cf, pc-cf, petg, pla, pva |
| Price (EUR) | 35000 |
|---|---|
| Date | 2026-06 |
| Note | Reference price in EUR from the EduFacturing database; verify with the retailer. |
| Manufacturer | Stratasys |
|---|---|
| Technology | FDM |
| Class | industrial |
| Build volume | 305 x 254 x 305 mm |
| Kinematics | bedslinger |
| Auto levelling | yes |
same class and kinematics, close in price within 30 percent
| Model | Class | Kinematics | Build volume | Price (EUR) |
|---|---|---|---|---|
| F270 (this) | industrial | bedslinger | 305 x 254 x 305 mm | 35000 |
| ONE | industrial | bedslinger | 1005 x 1005 x 1005 mm | 45000 |
| F170 | industrial | bedslinger | 254 x 254 x 254 mm | 18000 |
| Mark Two | industrial | bedslinger | 320 x 132 x 154 mm | 15000 |
| Material | Nozzle temperature | Bed temperature |
|---|---|---|
| PA-CF | 265-320 °C | 75-110 °C |
| PETG | 230-265 °C | 70-85 °C |
| PLA | 210-230 °C | 55-65 °C |
| PVA | 220-240 °C | 45-65 °C |