Skip to content

Pro 95 S

The Pro 95 S is a DLP 3D printer from SprintRay with a 192 x 108 x 200 mm build volume.

The Pro 95 S is a DLP 3D printer from SprintRay with a 192 x 108 x 200 mm build volume.

Calibration

The SprintRay Pro 95 S is a Digital Light Processing (DLP) resin 3D printer, which operates fundamentally differently from Fused Deposition Modeling (FDM) filament printers . Because it uses UV light to cure liquid resin layer-by-layer, FDM-specific calibration parameters such as e-steps, flow rate, PID tuning, retraction, and pressure advance do not apply to this machine.

Common defects

Software and Connectivity Failures

  • Symptom: The printer becomes completely non-functional, behaves unexpectedly, fails to connect to the network, or becomes unresponsive after an over-the-air software update , .
  • Cause: A failed software update, software glitches, or residual electrical charge in the system , .
ManufacturerSprintRay
TechnologyDLP
Classindustrial
Build volume192 x 108 x 200 mm
Layer height25-200 µm
Enclosurepassive
Auto levellingno
Price15 000 EUR
Compatible materialscastable-resin, dental-resin, flex-resin, high-temp-resin, standard-resin, tough-resin, water-wash-resin

Price with source and date

Price (EUR)5000
Date2026-06
NoteReference price in EUR from the EduFacturing database; verify with the retailer.

Specifications

ManufacturerSprintRay
TechnologyDLP
Classindustrial
Build volume192 x 108 x 200 mm
Layer height25-200 µm
Auto levellingno

Compared with 3 similar

same class and kinematics, close in price within 30 percent

ModelClassBuild volumePrice (EUR)
Pro 95 S (this)industrial192 x 108 x 200 mm5000
MAX UVindustrial119 x 67 x 200 mm6000
Figure 4industrial125 x 70 x 196 mm25000
Asiga PRO 4K XLindustrial217 x 122 x 400 mm27000

Compatible materials and print settings

Material
Castable Resin
Dental Resin
Flexible Resin
High-Temp Resin
Standard Resin
Tough Resin
Water-Washable Resin