Ender-3 V3

The Ender-3 V3 is an FDM 3D printer from Creality with a 220 x 220 x 250 mm build volume.

Specifications

Hotend: Equipped with a 60W ceramic heater capable of reaching a maximum temperature of 300°C .

Bed: Features a heated bed that reaches up to 110°C, paired with a flexible, magnetic PEI spring steel build plate for print adhesion [1, 3, 4].

Chamber & Enclosure: It is an open-frame printer with no enclosure and no active chamber heating .

Build Volume: 220 x 220 x 250 mm [3, 9, 10].

Kinematics: Uses a CoreXZ motion system where the X and Z axes are paired via timing belts and driven by two high-torque stepper motors mounted at the base of the machine, reducing the weight of the gantry .

Calibration

Here is a step-by-step calibration guide for your Creality Ender-3 V3, drawing from your sources.

(Note: While your sources cover most of these topics, they do not provide specific commands for PID tuning. I have included general instructions for PID tuning below, but please be aware that this specific step relies on information outside of your provided sources).

• Bed Leveling.

Common defects

Defects, Bugs, and Failures

1. Creality Print 6.0 "Zero Temps" Bricking Bug (Ender-3 V3 / V3 Plus)

• Symptom: The printer turns on but refuses to start printing. Temperature sensors read zero, a yellow "broken wire" or filament sensor icon appears, and the self-check fails [1, 2].
• Cause: Corrupted G-code files generated by the Creality Print 6.0 slicer update freezing the CrealityOS system [2, 3].
• Fix: Do not factory reset.