Artillery Hornet

The Artillery Hornet is an FDM 3D printer from Artillery with a 220 x 220 x 250 mm build volume.

Calibration

• Verify the mechanical baseline before touching slicer settings.

Action: Unbox the printer, inspect the frame, check that the gantry is square, confirm that the Y-bed rolls smoothly, and verify that the X-axis belt tension is firm but not guitar-string tight. Then power the machine and run all axes slowly from the control knob to look for binding, missed steps, or grinding.

Common defects

The Hornet’s most important limitations are not catastrophic manufacturing flaws; they are budget-platform tradeoffs that show up as failed expectations when users try to push it beyond its intended envelope.

• PTFE-lined hotend temperature ceiling
• Symptoms: Heat creep, inconsistent extrusion, softening of the PTFE path, clogging, or degraded retraction behavior when printing too hot.

What it is used for

The Artillery Hornet is strongest when used as a compact, quiet, low-cost FDM printer for PLA, PETG, and TPU in a home, hobby, or light maker environment.

• PLA prototyping