M5C

The M5C is an FDM 3D printer from AnkerMake with a 220 x 220 x 250 mm build volume.

Specifications

Hotend: All-metal hotend capable of reaching a maximum temperature of 300°C , , . It utilizes a direct-drive extruder that achieves a high extrusion flow rate of 35 mm³/s , .

Bed: Heated PEI textured flexible spring steel magnetic build plate , , . The maximum bed temperature is 100°C according to official manufacturer specifications , , though some third-party comparison databases list it at 120°C , .

Chamber / Enclosure: Open-frame design with no enclosure or chamber included , . If you intend to print temperature-sensitive, high-temperature filaments like ABS or ASA, it is highly recommended to add an aftermarket insulation enclosure , , .

Calibration

Here is a step-by-step calibration guide tailored specifically for the AnkerMake M5C, incorporating general 3D printing best practices and the unique features of this machine.

• Bed Leveling & First-Layer Z-Offset

The AnkerMake M5C uses a strain gauge in the nozzle for a 49-point (7x7) automatic bed leveling routine, meaning there are no manual bed leveling knobs to adjust .

• Step: Open the AnkerMake mobile app, go to device settings, and tap "Auto Level" [2, 4].