Slicer settings reference, with an AI assistant built in
Slicers ship with hundreds of parameters, and most of them interact with several others. SliceAGENT is a settings reference plus an AI assistant: what a setting actually does, when it's worth touching, and which other settings it fights with or depends on.
Free, no sign-up required.How it works
Three steps, whether you know the setting's name or only the symptom on the part.
Search by name or by problem
Type the setting name, or describe what's going wrong on the print instead. The reference finds the right parameter either way, so you don't need to know its name first.
Read what it actually does
Each entry covers what the setting controls, what a reasonable value range looks like, and which other settings it interacts with, so one change doesn't quietly break three more.
Ask the AI assistant for your case
Still unsure what applies to your printer, material or failure? Ask the built-in assistant and get an answer scoped to your specific situation, not a generic definition.
Works across slicers
The same concept is explained once, then mapped across the major FDM slicers and materials.
Why this reference
A setting rarely acts alone, and a forum thread from 2014 rarely says which slicer version it was even written for.
A full settings reference
Every parameter that matters for a slice sits in one systematized place, not spread across five forum threads with contradictory advice.
An AI assistant, not just static text
Ask about your printer, material or the specific problem you're seeing, and the assistant answers for that context instead of repeating a generic definition.
Cross-slicer by design
The same underlying concept is explained once, then mapped across Cura, PrusaSlicer and the other major slicers, so switching software isn't starting over.
Start from the symptom
Don't know the setting's name? Describe what the print is doing wrong and get routed to the parameter that's actually responsible for it.
Where most first attempts go wrong
The same four settings decide whether a material prints cleanly or warps, strings and delaminates.
| Material | Nozzle temperature | Bed temperature | Cooling | Enclosure |
|---|---|---|---|---|
| PLA | Low, forgiving range | Low, skippable on some setups | Aggressive, fans near maximum | Not needed |
| PETG | Moderate, narrower window | Moderate | Light, too much hurts layer bonding | Not needed |
| ABS / ASA | High | High, needed for bed adhesion | Minimal to none | Recommended, warps without it |
| TPU | Moderate, printed slow | Low | Light to moderate | Not needed |
None of these are fixed numbers: they shift with the specific filament, nozzle and cooling setup on your machine. That is exactly the kind of judgment call the reference and the AI assistant are built to help with, instead of leaving you to guess from a spool label.
Frequently asked questions
Which slicers does SliceAGENT cover?
The reference focuses on the main FDM slicers, including Cura and PrusaSlicer, and explains each concept in terms that transfer between programs. A setting named one way in PrusaSlicer often has a direct equivalent in Cura under a different label and a slightly different default, and the entry covers that mapping instead of treating each slicer as a separate world.
What can the AI assistant actually do?
It explains a setting in the context you give it: your printer, your material, or the specific defect you're seeing on the part. Instead of returning the generic definition, it suggests where to start adjusting and what side effects to expect from that change, which is the part a static glossary entry can't do on its own.
How is this different from searching a forum?
Forum threads answer one person's printer on one day, often years ago, and different threads contradict each other. This puts the settings in one systematized place with reviewed content, so you're not cross-referencing five posts from 2014 to work out which advice still applies to a current slicer version.
Does it cost anything to use?
No. SliceAGENT itself is free to use, with no sign-up required to search the reference or ask the assistant a question. It also sits inside the wider EduFacturing tool set, which can be unlocked as a bundle if you want the rest of the tools too, but that bundle is optional and unrelated to using this reference on its own.
Does it explain how settings interact, not just what each one does alone?
Yes, and that is the part most quick explanations skip. A setting rarely acts alone: retraction interacts with temperature and flow, cooling interacts with bridging and overhangs, and entries note which settings a given change is likely to fight with, so you can predict the side effect before you reprint and wait to find out.
I don't know the setting's name, only that a print is failing. Can I still use it?
Yes. You can search by what you are observing on the failed print rather than by a parameter name you would have to already know. The reference routes the symptom toward the setting most likely responsible, then explains it from there, including reasonable values and what else it interacts with.
Other tools
Part of the EduFacturing tool set.
The rest of the tool set
This tool is open to everyone, no account needed. It is one of a set of more than a hundred engineering tools on EduFacturing: calculators, calibration helpers, slicer references, defect diagnosis, CAD utilities and printer configurators. Most of them sit behind a free account.
Create a free accountFree account. No card, no trial period.