Metal X

The Metal X is a DMLS 3D printer from Markforged with a 250 x 220 x 200 mm build volume.

Specifications

Here are the verified technical specifications for the Markforged Metal X 3D printer based on the provided sources:

Build Volume: 300 x 220 x 180 mm (11.8 x 8.7 x 7.1 in) .
Nozzles / Extruders: The print system utilizes a dual-nozzle setup [2, 3]. One nozzle is dedicated to the metal material, and the second is dedicated to the ceramic release material . To distinguish them, newer metal nozzles feature a vertical groove on each of their six hex faces, while release nozzles feature three dimples on alternating sides [4, 5].

Part Quality Defects & Failures

Green State Warping
Symptom: The part warps off the print bed or deforms immediately after removal .
Cause: Polymer chains in the filament’s binder contract as they cool .
Fix: Proceed with the workflow; warping typically reduces naturally after the part is washed and sintered .
Inconel Crumbling/Cracking (Green State)
Symptom: Inconel parts crack or crumble while sitting on the print bed .

Manufacturer	Markforged
Technology	DMLS
Class	industrial
Build volume	250 x 220 x 200 mm
Layer height	60-120 µm
Kinematics	gantry
Enclosure	active
Auto levelling	yes
Price	100 000 EUR
Compatible materials	alsi10mg, cocr, inconel-718, ss-316l, ti-6al-4v

Price (EUR)	100000
Date	2026-06
Note	Reference price in EUR from the EduFacturing database; verify with the retailer.

same class and kinematics, close in price within 30 percent

Model	Class	Kinematics	Build volume	Price (EUR)
Metal X (this)	industrial	gantry	250 x 220 x 200 mm	100000
Studio System 2	industrial	gantry	300 x 200 x 200 mm	120000
FS121M	industrial	gantry	120 x 120 x 100 mm	150000
AconityMICRO	industrial	gantry	100 x 100 x 150 mm	200000