3D printing price calculator: upload a model, see the price estimate
Upload an STL, OBJ or STEP file and see the estimated price, weight and print time live for your material, quality, infill and quantity. The model is measured in your browser, and the file goes to the server only when you place the order.
Opens with a free account.
- STL, OBJ, STEPone file up to 50 MB
- 4 materials8 material and colour options
- Weight and timelive on every change
- From 10 EURthe minimum order
What a 3D printing price calculator does
This 3D printing price calculator from EduFacturing is an online tool that measures your 3D model in the browser, shows an estimated price, weight and print time, and leads to an order for printing at the EduFacturing print farm.
The price comes from the model itself, not from the size of its box: volume, material and infill give the weight, and the weight gives the time and the price. No file yet? Below the upload field there are links to libraries of ready-made models.
The server confirms the final price when you order.
Price, weight and print time from your STL file
Measures a model from STL, OBJ or STEP
It accepts STL, OBJ and STEP up to 50 MB. OBJ and STEP are converted to STL on your machine, then volume and dimensions are worked out and the model is shown in 3D.
Shows price, weight and time live
Pick the material (PLA, PETG, TPU 95A, PETG-CF), colour, quality (0.28, 0.20 or 0.12 mm), infill from 10 to 60% and a quantity up to 999. The price is recalculated on every change.
Checks the dimensions
It warns when the model does not fit in 220 × 220 × 250 mm in its best orientation, with a thinnest side under 0.8 mm and with a side ratio of 3:1 or more (8:1 is an error). Above 250 mm on any axis the order is blocked.
Leads to the cart
At “Continue to order”, the file and options go to the server, which works out the final price and returns a cart with the order filled in.
When you need a 3D printing price estimate
You see the price of a print before any conversation.
You have no file
Below the upload field there are links to Thingiverse, Printables and GrabCAD: pick a ready-made model there and upload it here.
A one-off part
A spare part or a small box. A 20 mm cube in PLA at 15% infill weighs 4.0 g, but the minimum order is 10 EUR, so the price is 10.00 EUR.
Choosing quality
For a 50 mm cube in PLA, 15% infill, 1 piece: Fast is 3.49 hours and 10.67 EUR, and Fine is 8.97 hours and 17.58 EUR.
How the price of a 3D print is worked out
The price is worked out from the weight of the model. The same formula runs in the browser for the estimated price and on the server for the final one.
Volume and dimensions
The volume and dimensions come from the triangles of the model. The model is placed on the print bed.
Weight
The volume in cm³ is multiplied by the material density and by an infill coefficient of 0.30 + 0.70 · infill.
Time and price
Time is the weight divided by the grams per hour of the chosen quality. Price is the weight times the price per gram and the quality factor.
Quantity and minimum
Quantity multiplies the price, and 5, 20 and 50 pieces earn a discount. Below 10 EUR the price rises to the minimum order.
| Applies to | Formula | Meaning |
|---|---|---|
| Weight | m = V · ρ · (0.30 + 0.70 · infill) | V in cm³, ρ in g/cm³, infill from 0 to 1 |
| Time | t = m / (g/h) · quantity | g/h is 18 for Fast, 12 for Standard and 7 for Fine |
| Price | price = max(10; m · price per gram · factor · quantity · discount) | the factor is 0.85, 1 and 1.4 for Fast, Standard and Fine |
| Discount | × 0.9 from 5 pcs, × 0.8 from 20, × 0.7 from 50 | by the quantity in the order |
A price from the model, not from its box
The file stays with you
Measuring happens in the browser. The file goes to the server only at “Continue to order”.
One price at both ends
The estimated price follows the server formula, and if they differ by more than 0.02 EUR the confirmed price is shown.
The estimated price is a guide: the server works out the final one on upload. The formula uses volume, material, infill, quality and quantity, so it leaves out supports, orientation and post-processing. The warnings are based on the dimensions, not on the walls and mesh of the model.
Printing is in filament, in four materials, up to 250 mm on an axis and one file up to 50 MB. The pricing data comes from the EduFacturing rules core, calibrated in July 2026.
Questions about 3D printing cost and ordering
How much does 3D printing cost for one part?
It depends on the weight. A 50 mm cube in PLA, Standard (0.20 mm), 15% infill is 62.8 g, 5.23 hours and 12.56 EUR for 1 piece. A 20 mm cube at 15% infill is 4.0 g, but the minimum order is 10 EUR.
How to order a 3D printed part, and do I need an account?
The tool opens with a free account. Upload the model, choose material, quality, infill and quantity, then press “Continue to order”: the server works out the final price and returns a cart with the order filled in.
Which files are accepted?
STL, OBJ and STEP up to 50 MB, one file at a time. OBJ and STEP are converted to STL in the browser.
Is my file uploaded to a server?
Not until you press “Continue to order”. Volume, dimensions and price are worked out in the browser; when you order, the file and options go to the server.
How large can the part be?
Up to 250 mm on every axis. A larger model is flagged as not fitting and the order is blocked: split it into parts.
How does quantity change the price?
From 5 pieces the price is 10% lower, from 20 it is 20% lower and from 50 it is 30% lower. Five 50 mm cubes in PLA Standard are 56.50 EUR instead of 62.80.
The 3D printing price estimates is free. Pro opens the rest
Pro costs 15 EUR a month and opens 45 Pro tools.
In the Cost & planning group:
Related tools
3D print or buy calculatorIs 3D printing cheaper than buying? Compare the shop price with the cost to print a part and see when the printer pays for itself. Free, no account.
3D print cost calculator3D print cost calculator: upload an STL, pick a machine and a material, get the cost, the price and a quote. English screen. Pro, 15 EUR a month.
3D printing prototype cost calculatorPrototype cost calculator for 3D printing: enter the technology, material and volume for the cost, grams of material, print time and risk. Free account.
3D printer electricity cost calculator3D printer electricity cost calculator: kWh and euros for one print and for a month, day and night tariff, the cost of a printer left on, and CO₂. Free to use.
See the price estimate for your model
Opens with a free account.