In 2025–2026, Micro-SLA and sub-micron 3D printing technologies have matured from lab curiosities to commercial platforms. With feature resolutions reaching 0.2–2 μm (finer than a human hair (70 μm)) these systems enable fabrication of micro-optics, microfluidic devices, MEMS components, and metamaterials.
Sub-Micron Printing Technologies
1. Two-Photon Polymerization (2PP / TPP)
The most precise 3D printing technology in existence. Instead of single UV photon absorption, 2PP uses simultaneous absorption of two infrared photons (typically Ti:Sapphire femtosecond laser at 780 nm):
- Polymerization occurs only within the focal volume: a voxel of 100–500 nm.
- No layer-by-layer processing required: the laser scans freely in 3D space.
- Resolution: 100–500 nm (0.1–0.5 μm).
2. Projection Micro-Stereolithography (PμSL)
DLP technology with demagnifying optics achieving 5–10 μm resolution:
- Uses a standard UV DLP projector with a demagnifying optical system.
- Significantly faster than 2PP (projects entire layers simultaneously).
- Suitable for larger micro-parts (mm scale with μm accuracy).
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Main Platforms
| Manufacturer | Platform | Resolution | Build Volume |
|---|---|---|---|
| Nanoscribe | Photonic Professional GT2 | 200 nm | 100×100×8 mm |
| BMF | microArch S240 | 2 μm | 100×100×75 mm |
| UpNano | NanoOne | 170 nm | Ø22×25 mm |
| 3D MicroPrint | (metal μ-SLM) | 5 μm | 7.6×7.6×6.3 mm |
Pros and Cons
Pros:
- Sub-Micron Accuracy: 2PP achieves 100–200 nm resolution.
- True 3D Freedom: 2PP scans in free 3D space (not layer-by-layer).
- Unique Applications: Micro-optics and metamaterials impossible with other technologies.
Cons:
- Microscopic Build Volume: 2PP can only print microns to low millimeters.
- Slow Speed (2PP): Point-scanning → hours for mm³ parts.
- Extreme Cost: Nanoscribe GT2 > €300,000.
- Limited Materials: Primarily acrylate and epoxy photopolymers.
FAQ
Interactive Analyzer for Micro-Sla And Sub-Micron 3D Printing: Nanoscale From Photons
Select a profile to view detailed analysis.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
