Each assistant does a job that otherwise costs you hours: a diagnosis instead of digging through forums, a lesson instead of a whole evening of preparation, a calculation instead of an expensive consultant. They stand on the checked data behind EduFacturing.
Binder jetting: the shrink is per axis, and the strength arrives in the furnace.
Open this assistantWhat you have to prove for a medical or food contact part, and in what order.
Open this assistantNiches, prices and running costs for manufacturing services in Bulgaria, with the sums shown.
Open this assistantCan I put this on the market: the file, the risk assessment and repeatability.
Open this assistantCutting data with speed, feed and time, calculated rather than guessed.
Open this assistantTurning data, and why the diameter changes the speed along the length.
Open this assistantPaste and ceramic: green part, debinding, sintering, and the three traps in between.
Open this assistantReady lessons, assignments and tests on manufacturing technologies: 5 minutes, not an evening.
Open this assistantDescribe the part with dimensions: it models it, checks itself and hands you a finished STL.
Open this assistantPrepares you for the negotiation and for the lawyer: what to settle yourself and where contracts tear.
Open this assistantThe listing that sells: in a minute, in two languages, with the facts right.
Open this assistantWhat the part truly costs you: material, machine hour, labour and scrap.
Open this assistantCheck the model BEFORE you start the print: walls, overhangs, a broken mesh.
Open this assistantPhotograph the failed print: the assistant tells you what it is and how to fix it.
Open this assistantComponents, circuits and calculations, with the formula behind every number.
Open this assistantEngineering answers with a citation to the rule, not opinions from a forum.
Open this assistantStart and end blocks, checked by machine against the safety rules.
Open this assistantPipe, pump and cylinder: speed, pressure drop, cavitation and force, calculated.
Open this assistantShrink, draft and flow path. The mould right the first time.
Open this assistantIs this mine and how is it protected: patent, design, trade mark or trade secret.
Open this assistantNesting, the smallest hole a thickness allows, and which of the three processes is yours.
Open this assistantInstructional design for learning games: feedback, difficulty, repetition and child safety.
Open this assistantBearing, spring, gear: will it hold, and for how long.
Open this assistantWhich machine, what its hour actually costs, and where the scrap goes.
Open this assistantChoosing and comparing materials, with a clear line drawn at fatigue.
Open this assistantYour personal teacher: explains it simply, then tests you with one question.
Open this assistantProcess and batch control for DMLS and SLM. Safety comes from the powder data sheet.
Open this assistantThe metal bed: residual stress decides everything that comes after it.
Open this assistantIs the instrument capable, where the guard band sits, and what an R and R study measures.
Open this assistantMoisture and heat before the print: where the strength is lost quietly.
Open this assistantHow much of the shift actually works: availability, speed, quality, and where the time leaks.
Open this assistantUpload an STL: which of the eight poses gives the least support and the most strength.
Open this assistantWill the stack hold, is the cushioning enough, and what you are actually billed for.
Open this assistantVat photopolymerisation: exposure, cure and wash, with the numbers behind each.
Open this assistantOrders sorted by due date, and an honest answer about which will not fit the capacity.
Open this assistantWhich process above the thickness a laser handles, and which when heat is not allowed.
Open this assistantWhat happens after the print, in what order, and how long it takes per part.
Open this assistantAn interval plan that catches the failure before it stops the work.
Open this assistantThe right process for your part: 3D printing, CNC, laser, casting or sheet metal.
Open this assistantIs bidding realistic, what has to be gathered, and which deadlines are burning.
Open this assistantFMEA with numbers: which failure carries the most risk, why, and what is fixed first.
Open this assistantUpload the customer's STL: get a ready quotation draft with the sums shown.
Open this assistantSafe distance, stopping distance and payload at reach, calculated.
Open this assistantCp, Cpk and the control chart: control first, capability second.
Open this assistantPowder sintering: where the powder helps you and where it stays locked inside.
Open this assistantNoise is calculated, exposure is measured. Honest about where its limits are.
Open this assistantFlat patterns with a K factor, minimum radii and the order of the bends.
Open this assistantName the printer, material and goal: get a full profile with a reason for every value.
Open this assistantCritical flaw, safety margin and inspection interval: will it break, and when.
Open this assistantWhat happens to the workshop after you: shares, machines, documentation, access.
Open this assistantBraille, raised text and grips: the numbers at which a finger can read.
Open this assistantTool life, deflection and workholding. Cutting data lives in another assistant.
Open this assistantLight structures: lattices, TPMS, optimisation and a mesh that stays valid.
Open this assistantWeld throat, heat input and carbon equivalent, with the check included.
Open this assistantThese are AI assistants: the answers are generated and can contain errors, so check anything that matters. They do not replace an engineer, an accountant or a teacher. They are a fast first pass that saves you the search.
The first runs are included in the free credits that come with an account. For daily use there is a pass with a monthly allowance of credits.
Write in English and the assistant answers in English. The platform is built in Bulgaria, so a few assistants carry Bulgarian context by design: the copywriter, for one, produces Bulgarian selling text, because there the language is the product itself.