Skip to content Skip to content
EduFacturing
Materials

Ultem 1010 PEI: Space Applications and Vacuum Durability

Ultem 1010 PEI: Space Applications and Vacuum Durability

In 2025–2026, high-performance additive manufacturing continues to push the boundaries of aerospace engineering. Among the select class of space-ready polymers, Ultem 1010 (Polyetherimide – PEI) stands out as a critical material for vacuum and high-temperature applications.

Designing parts for low Earth orbit (LEO) and deep space demands strict compliance with molecular outgassing standards to prevent the degradation of optical sensors and solar cells.


Polymer Chemistry & Thermal Properties of Ultem 1010

Ultem 1010 is an amorphous thermoplastic polyetherimide synthesized by SABIC. Its chemical structure consists of repeating imide and ether linkages:

  • Imide groups provide thermal stability, mechanical rigidity, and high tensile strength via their rigid aromatic structures.
  • Ether linkages offer melt processing flexibility, allowing the polymer to be extruded into filament form.

This molecular structure results in a glass transition temperature ($T_g$) of 217°C and a heat deflection temperature (HDT) of 216°C at 1.82 MPa, allowing components to operate under load in high-temperature environments.


NASA Outgassing Specifications (NASA SP-R-0022A)

In a vacuum, standard polymers release volatile compounds (outgassing) such as plasticizers, moisture, and unreacted monomers. These gases condense onto cold optical lenses, mirrors, and solar panels, permanently clouding sensors.

Under NASA SP-R-0022A (and ESA ECSS-Q-ST-70-02C), materials must meet the following criteria after exposure to vacuum at 125°C for 24 hours:

  1. Total Mass Loss (TML): Must be less than 1.0%. Ultem 1010 consistently scores between 0.20% and 0.40%.
  2. Collected Volatile Condensable Material (CVCM): Must be less than 0.10%. Ultem 1010 exhibits exceptional stability with a CVCM of less than 0.01%.

This makes Ultem 1010 certified for satellite brackets, electronic enclosures, and structural components in space applications.


Interactive Filament Selector

Answer 3 quick questions and find the optimal material for your project.

1. What are the mechanical requirements for the part?


FDM Process Parameters and Hardware Constraints

Printing Ultem 1010 requires dedicated industrial-grade 3D printers equipped with actively managed thermal environments:

Print Parameter Value Technical Justification
Nozzle Temperature 360°C – 400°C Overcomes high melt viscosity to ensure proper extrusion flow.
Bed Temperature 130°C – 160°C Keeps the initial layers above their crystallization threshold for adhesion.
Heated Chamber 90°C – 150°C Mandatory. Eliminates residual thermal stress and prevents layer delamination.
Print Speed 15 – 30 mm/s Allows optimal heat transfer and polymer chain diffusion across layer boundaries.
Part Cooling Fan 0% (Disabled) Prevents thermal shock cracking from rapid cooling.

Pros and Cons of Ultem 1010

Pros:

  • Extreme Thermal Stability: Operates continuously at temperatures up to 200°C.
  • Space-Qualified Outgassing: Fully compliant with NASA/ESA outgassing guidelines.
  • Flame and Smoke Retardancy (FST): Meets UL 94 V-0 requirements and complies with aerospace smoke/toxicity limits (FAR 25.853).
  • Excellent Dielectric Strength: Ideal for aerospace electrical isolators and terminal blocks.

Cons:

  • Strict Hardware Requirements: Requires specialized high-temperature printers with actively heated metal chambers.
  • High Hygroscopicity: Absorbs atmospheric moisture rapidly; must be dried at 110°C for 12 hours before printing.
  • Chemical Sensitivity: Susceptible to micro-cracking when exposed to chlorinated solvents like dichloromethane.

Frequently Asked Questions (FAQ)

Q: How does Ultem 1010 compare to Ultem 9085?
A:
Ultem 1010 offers higher tensile strength and a higher glass transition temperature ($T_g = 217^circ ext{C}$ vs $186^circ ext{C}$). However, Ultem 9085 contains an impact modifier that increases ductility and toughness, making it less brittle and easier to print for aircraft cabin interiors.
Q: Can I print Ultem 1010 on a standard PEI spring steel bed?
A:
No. Because Ultem 1010 and the PEI bed sheet are the same chemical family, they will fuse together at 150°C bed temperatures, destroying the build sheet. Use a high-temperature polysulfone (PSU) bed plate or apply a specialized release agent.
Q: Is post-print annealing necessary?
A:
Yes, to achieve maximum Z-axis isotropy and relieve internal molding stresses, Ultem 1010 parts should undergo controlled thermal annealing in an oven, ramping up to 200°C and slowly cooling down over several hours.

Ultem 1010 Pei: Space Applications And Vacuum Durability Calculator

Interactive optimization calculator.

Optimal Value
0.00

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).