Skip to content Skip to content
EduFacturing
Printers

ProX SLS 6100 – Specs and Settings

ProX SLS 6100 – Specs and Settings

The 3D Systems ProX SLS 6100 is an industrial SLS machine for serial production of polymer parts without support structures. With a 381×330×460 mm build volume, automated powder handling and a heated build chamber, the ProX SLS 6100 turns laser sintering of nylon into a managed production process.

What it is

The ProX SLS 6100 operates on the principle of selective laser sintering (SLS): a CO₂ laser scans cross-sections over a powder layer, fusing particles together, then the platform drops by one layer thickness and the process repeats. Without support structures, the powder bed itself retains the geometry. The machine is designed for a production environment: the closed system for recycling and blending powder (virgin + refresh) reduces material waste, while automated loading and unloading minimize manual labor between cycles. The result: functional end-use parts with isotropic mechanical properties and complex internal geometries impossible with traditional methods.

Technical specifications

TechnologySLS (Selective Laser Sintering): CO₂ laser
Build volume381 × 330 × 460 mm
LaserCO₂, 100 W
Layer thickness0.08 – 0.15 mm
Powder handlingautomated: loading, blending and recycling of powder
Heated chamberyes: controlled temperature for uniform sintering
Class / PriceIndustrial · ~€300 000

Applications and industries

  • Functional end-use parts (serial production of strong nylon components with complex geometry, directly from machine to assembly) no tooling required (Industrial manufacturing and consumer goods)
  • Aerospace and automotive components: lightweight brackets, ducts and chassis parts with topology optimization, meeting stringent mechanical and thermal requirements (Aerospace and automotive)
  • Durable series batches (producing hundreds of identical parts in one cycle with repeatable mechanical properties) suitable for medical devices, sporting goods and industrial automation (Medical devices and sporting goods)

Production workflow

  1. Preparation: load and condition the powder. Powder (virgin + recycled at the correct ratio) is homogeneous and at operating temperature, guaranteed density and sintering repeatability.
  2. SLS sintering: the laser scans layer by layer inside the heated chamber. Controlled chamber temperature minimizes thermal gradients, parts free of distortion and with isotropic properties.
  3. Cooldown: wait for the controlled cool-down of the powder cake. Slow, uniform cooling prevents residual stress and warping, parts retain their dimensional accuracy.
  4. Depowdering and finishing: extract parts and remove powder with bead blasting or vibratory systems. Clean surface ready for direct use or post-processing (dyeing, impregnation, metallization).

Key considerations

Rough surface finish: SLS parts exhibit a characteristic matte-grainy texture from partially bonded powder particles on the surfaceReduce layer thickness to 0.08 mm; apply bead blasting or chemical smoothing (vapor smoothing with PA solvents) when a smooth surface is required.
Powder refresh rate (powder not sintered during the cycle degrades thermally upon reuse) too high a proportion of recycled powder deteriorates mechanical propertiesMaintain the 3D Systems-recommended virgin/recycled powder ratio (typically 50/50 for PA12); document the number of cycles for each batch.
Cooling distortion: uneven cooling or premature chamber opening causes thermal stress and warping of thin-walled or flat partsRespect the full cool-down cycle; orient flat parts at an angle; add stiffening ribs to thin-walled geometries.
Porosity: insufficient laser power or incorrect scan density leaves incompletely fused zones, reducing part strength and densityCheck and calibrate laser power to 3D Systems-recommended parameters for the specific material; avoid using degraded powder.

Materials and applications

Pick a material/alloy this machine processes to see its properties and typical applications:

↑ Pick a material
Properties
Applications

Conclusion

The ProX SLS 6100 is the choice for manufacturers who need repeatable, automated production of strong polymer parts with complex geometry, without compromising between the throughput of serial production and the precision of the detail. Automated powder handling reduces operating costs, the heated chamber ensures isotropic properties, and the broad materials portfolio covers needs from aerospace to medical.

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).