Skip to content Skip to content
EduFacturing
Guides

FDM with Nylon (PA) – the Engineering Standard

FDM with Nylon (PA) – the Engineering Standard

Nylon (polyamide) is the engineering filament that makes the difference between ‘3D printed prototype’ and ‘functional production part’. It’s tough, flexible, wear-resistant, and works well under mechanical load. Nylon is the choice for gears, bearing housings, hook-and-loop fasteners, drone arms, and anything that will move and grind. But nylon comes with problems: it absorbs moisture more aggressively than any other common FDM plastic, requires high print temperature (250-280°C), and doesn’t tolerate damp environments without an enclosure. In this guide we’ll show how to print nylon reliably, from PA6 to carbon-fiber-filled PA-CF.

Types of nylon, PA6, PA12, PA-CF

PA12 (polyamide 12): most used nylon for FDM. Melting around 175°C (prints at 240-260°C), tensile strength 50 MPa, absorbs moisture less than PA6. Suitable for most engineering applications.

PA6 (polyamide 6): tougher and more wear-resistant than PA12. Tensile strength 70-80 MPa. Prints at 270-290°C. Absorbs moisture extremely quickly, without active drying not recommended.

PA-CF (carbon-fiber-filled nylon): nylon with 15-30% carbon fiber. Exceptionally tough and rigid, less warping than pure nylon, excellent for drones and engineering parts under mechanical load. Prints at 280-300°C, abrades brass nozzles quickly: needs hardened steel nozzle. €60-€90/kg.

PA-GF (glass-fiber-filled): alternative to PA-CF, cheaper (€40-€50/kg), similar stiffness, but more brittle on impact.

For most users: PA12 is the starting choice. PA-CF comes when you have experience and need extreme stiffness.

Bambu Lab X1-Carbon (€1449): enclosed chamber and hardened nozzle come standard. Recommended for most nylon work.

Prusa MK4 with Prusa Enclosure (€999 + €330): open-source, excellent build quality. With hardened nozzle upgrade (€30): ready for PA-CF.

Qidi Plus 4 (€650): heated chamber to 65°C, hardened hotend. Recommended for production nylon work.

Markforged Mark Two/X7: professional choice for continuous-fiber-reinforced nylon. Prices €15,000+. Recommended for industrial clients.

Avoid: open-frame printers like stock Ender 3, nylon WILL warp in open chamber. Bambu A1 is also open frame; for nylon, X1-Carbon is necessary.

Polymaker PolyMide PA612: balanced nylon. €45-€55/kg. Recommended to start.

Taulman 645 Bridge: pioneer nylon for FDM. Global reputation for quality. €50-€60/kg.

Fiberlogy Nylon PA12: Polish brand, good quality, €35-€45/kg. Recommended for budget-conscious buyers.

Bambu Lab PAHT-CF: high-temperature carbon-fiber nylon, optimized for X1-Carbon. €70/kg.

Nanovia PA-CF: premium carbon-fiber nylon, €80-€100/kg. Recommended for drone and automotive parts.

Markforged Onyx (PA-CF): only for Markforged printers. Industrial gold standard.

Avoid: unbranded nylon. Differences in moisture absorption between batches make consistent print impossible.

Optimal settings for PA12

Nozzle temperature: 250-270°C. PA-CF: 270-290°C. Start in the middle and adjust ±5°C.

Bed temperature: 70-90°C. Garolite (special bed material) or PEI with slurry give best adhesion for nylon.

Chamber temperature: 40-50°C minimum. Without heated chamber: printing not recommended.

Speed: 30-60 mm/s. Under-extrusion is common at high speeds with nylon (high viscosity).

Cooling: 0-30%. Nylon loves slow cooling for good layer adhesion. First 10 layers: no cooling.

Layer height: 0.20-0.25 mm.

Retraction: 1-2 mm Direct Drive, 4-6 mm Bowden. Speed 30 mm/s.

Drying: CRITICAL for nylon. Dry filament 6-12 hours at 70-80°C before print. Wet nylon makes white bubbles in print and brittle layers. Inline filament dryer (PrintDry, SUNLU FilaDryer) is a recommended investment.

Common mistakes

Bubbles in print, brittle layers: wet filament. Dry 8 hours at 70°C. Place spool directly in filament dryer for print, not outside.

Warping: chamber too cool. Close bay door, add insulating panels, or move printer to a warmer room. 10mm brim mandatory.

Layer separation: nozzle temperature too low, or cooling too high. PA12 often wants 260-270°C, not the stock 240°C.

Delamination between infill and perimeters: nozzle temperature for PA-CF should be +10°C above pure PA12. Carbon fiber wicks heat: the material cools too fast.

Nozzle wear (on brass nozzles with PA-CF): switch brass to hardened steel nozzle (Bambu hardened, E3D Nozzle X). Brass wears out in 5-10 PA-CF print sessions.

Frequently Asked Questions (FAQ)

Q: Can nylon be used for gears?
A:
Yes: this is one of the best applications for PA12 or PA-CF. Recommend 100% infill, 4-5 perimeters, layer height 0.16 mm, hardened nozzle. Nylon gears work 50,000+ cycles without visible wear in clean conditions.
Q: Why does my nylon come out with white spots?
A:
Wet filament. Nylon is one of the most water-allergic plastics for FDM. Dry 8-12 hours at 70-80°C. Then keep filament in silica gel container between sessions. Wet nylon in Bulgaria’s climate after 24 hours out of the dryer becomes unusable for quality print.
Q: How much does nylon printing cost?
A:
Cost of 1 kg of PA12 printed parts: approximately €80-€120 (filament €45-€55, electricity €4-€6 for hot chamber, depreciation €15, post-processing). PA-CF: €120-€180/kg (pricier filament + nozzle wear). For production volume, consider SLS printing for nylon: much better consistency.
Q: Can nylon be acetone-polished like ABS?
A:
No: acetone doesn’t dissolve nylon. For smooth finish: vapor smoothing with more aggressive chemicals (DCM, formic acid, dangerous, industrial setup only) or mechanical polishing with fine sandpaper and polishing compound.

Interactive Analyzer for Fdm With Nylon (Pa), The Engineering Standard

Select a profile to view detailed analysis.

Strength / Durability 49%
Print Speed 61%

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).