In 2025–2026, Electrohydrodynamic (EHD) Jet Printing has advanced from research labs to commercial platforms for nanoscale additive manufacturing. EHD uses an electric field (rather than thermal or piezoelectric pressure) to draw ultra-fine jets from functional inks with diameters of 50 nm to 10 μm: 10–100× higher resolution than conventional inkjet.
Principle: Taylor Cone
- Capillary Nozzle: Functional ink is fed to a metallic capillary nozzle.
- Electric Field: High voltage (1–10 kV) is applied between nozzle and grounded substrate, deforming the liquid meniscus into a Taylor cone.
- Jet Formation: When electrostatic force exceeds surface tension, an ultra-fine jet (50 nm – 10 μm) extends from the cone apex.
- Deposition: The jet is directed to the substrate via the electric field and/or moving platform.
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Pros and Cons
Pros:
- Ultra-High Resolution: 50 nm – 10 μm (inkjet: 20–80 μm).
- Non-Contact Printing: Does not damage sensitive substrates.
- Universal Inks: Polymers, metal nanoparticles, biomaterials, ceramics.
- Low Cost: No expensive photomasks required (unlike lithography).
Cons:
- Slow Speed: Single jet → low throughput.
- Jet Instability: Taylor cone is sensitive to viscosity, conductivity, and humidity.
- High Voltage: 1–10 kV requires safety protocols.
- Limited Build Height: Primarily 2D and thin-layer 3D structures.
FAQ
Electrohydrodynamic (Ehd) Jet Printing: Nanoscale Additive Manufacturing Calculator
Interactive optimization calculator.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
