In 2025–2026, Cold Spray (CS) additive manufacturing has gained significant traction for metal deposition applications where thermal damage must be avoided. Unlike every other metal AM process, Cold Spray does not melt the feedstock. Instead, metal particles are accelerated to 300–1200 m/s in a supersonic gas jet and bond to the substrate through solid-state plastic deformation upon impact.
Process Physics
How Do Particles Bond Without Melting?
At high-velocity impact, kinetic energy converts into:
- Adiabatic Plastic Deformation: Both particle and substrate deform locally, disrupting surface oxide films.
- Surface Self-Cleaning: Clean metallic surfaces (oxide-free) come into direct atomic contact.
- Solid-State Bonding: Metallurgical bonds form through atomic diffusion at the interface, similar to explosive welding.
Critical Velocity: Each metal has a minimum impact velocity ($V_{cr}$) below which bonding does not occur:
| Metal | $V_{cr}$ (m/s) | Typical Process Gas |
|---|---|---|
| Aluminum | 600 – 700 | Air or $N_2$ |
| Copper | 500 – 600 | $N_2$ or He |
| Titanium | 700 – 900 | He (Helium) |
| Steel | 600 – 800 | $N_2$ or He |
| Inconel | 700 – 900 | He |
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Pros and Cons
Pros:
- No Melting = No HAZ: Critical for sensitive substrates.
- No Oxidation: Process occurs well below melting point.
- Minimal Residual Stress: CS generates compressive (beneficial) residual stresses.
- High Deposition Rates: 5–50 kg/hr (significantly higher than laser DED).
Cons:
- Porosity: 1–5% porosity (higher than PBF).
- Rough Surface: Requires CNC finishing.
- Expensive Helium: Titanium and superalloys require costly helium gas.
- Limited Geometric Complexity: Cannot create internal cavities.
FAQ
Cold Spray: Solid-State Metal Deposition Without Melting Calculator
Interactive optimization calculator.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
