In 2025–2026, closed-loop water filtration for SLA/DLP post-processing addresses the toxic chemical waste from resin washing. Contaminated IPA and water cannot be disposed of in drains.
The Problem
| Contaminant | Source | Toxicity | Disposal |
|---|---|---|---|
| Uncured resin | Wash station | High | Hazardous waste |
| IPA + resin | IPA wash | Medium | Hazardous waste |
Interactive Filament Selector
Answer 3 quick questions and find the optimal material for your project.
1. What are the mechanical requirements for the part?
2. What temperature will the part operate at?
3. Are there any specific environmental requirements?
Our recommendation:
PLA filament
Ideal for easy printing, model visualization and decorative parts.
Closed-Loop Solutions
- UV Curing wash water: UV polymerizes uncured monomers → filter sediment → reuse water.
- IPA Distillation: Heat contaminated IPA to 82.6°C → condense clean IPA → 80–90% reuse.
- Activated Carbon Filtration: Adsorbs dissolved monomers. Cheaper but filters need replacement.
FAQ
Interactive Analyzer for Closed-Loop Water Filtration For Sla Post-Processing
Select a profile to view detailed analysis.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
