Skip to content Skip to content
EduFacturing
Guides

3D printing with Nylon and CFF (carbon fiber) | EduFacturing

3D printing with Nylon and CFF (carbon fiber) | EduFacturing

CFF (Continuous Filament Fabrication) technology is a revolutionary process that allows standard thermoplastic parts to be reinforced with continuous strands of carbon fiber, fiberglass, or Kevlar. This creates composite parts with strength comparable to aluminum.

The most commonly used base material for CFF is Nylon (PA – polyamide). Nylon provides excellent wear resistance and chemical durability while acting as a perfect matrix to bind the reinforcing fibers.

Why Nylon is Perfect for CFF

  • High Wear Resistance: Nylon has an extremely low coefficient of friction, making it ideal for gears and plain bearings.

  • Chemical Resistance: It withstands oils, fuels, and many industrial chemicals, ensuring longevity in aggressive environments.

  • Flexibility and Toughness: Nylon itself is not brittle, allowing the part to absorb impacts, while the continuous fibers add stiffness.

  • Excellent Adhesion: The nylon matrix bonds perfectly with carbon fibers or fiberglass during the CFF process.

Hardware selection is key for the proper deposition of continuous fibers within the nylon matrix.

  • Markforged Mark Two: The desktop standard in CFF printing. Supports carbon fiber, Kevlar, and fiberglass reinforcement.

  • Markforged X7: An industrial system with a larger build volume and laser quality control, designed for batch production.

  • Anisoprint Composer A4: An innovative alternative that allows customization of fiber density and direction (CFC technology).

While printer manufacturers offer their own materials (like Markforged’s Onyx), here are some excellent alternatives on the market.

  • MatterHackers NylonX: Nylon micro-reinforced with chopped carbon fibers, serving as an excellent base material.

  • Overture Overture Nylon: A budget-friendly yet reliable nylon for general engineering applications and prototyping.

  • Polymaker Polymide PA6-CF: A high-temperature nylon (PA6) with carbon fibers, offering exceptional strength and easy printability.

Working with nylon requires adhering to specific parameters to avoid defects.

Nozzle Temperature: 250°C – 270°C

Bed Temperature: 70°C – 90°C

Enclosure Required: Highly recommended

Material Drying: Mandatory (Nylon is highly hygroscopic)

Price per Kilogram (Nylon): $40 – $150

Typical Applications and Problems

CFF nylon parts are used to create functional prototypes, custom end-of-arm tooling (robotic grippers), and replacement metal parts.

  • Moisture Absorption: Nylon absorbs moisture from the air very quickly, leading to bubbling, poor layer adhesion, and degraded strength. Spools must be stored in dry boxes.

  • Warping: As it cools, nylon tends to shrink. A heated enclosure and proper bed adhesive are critical.

  • Design Complexity: Routing continuous fibers requires specific slicing software (e.g., Eiger) and planning the load path direction.

Frequently Asked Questions (FAQ)

Q: How much stronger does nylon get with CFF technology?
A:
When properly reinforced with continuous carbon fiber, a part can achieve tensile strength comparable to 6061 aluminum, but at a significantly lower weight.
Q: Can I print nylon on a regular 3D printer?
A:
Yes, pure nylon can be printed on most modern enclosed printers capable of reaching 260-280°C. However, reinforcing it with continuous fibers requires a specialized dual-extrusion CFF printer.
Q: How do I protect nylon from moisture?
A:
Store the material in airtight containers with desiccant and print directly from a dry box. Before printing, it is highly recommended to dry the filament in an oven at 70°C for several hours.

3D Printing With Nylon And Cff (Carbon Fiber) | Edufacturing Calculator

Interactive optimization calculator.

Optimal Value
0.00

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).