The Anycubic Kobra 3 Combo is an open-frame bedslinger in the hobby class, equipped with the ACE Pro multi-color system that enables automatic switching between up to 4 spools without manual intervention. With a 250×250×260 mm build volume and real-world speeds up to 300 mm/s, the Kobra 3 Combo brings multi-color FDM printing to the sub-500-euro price range.
What it is
The Kobra 3 Combo is an open-frame bedslinger with direct-drive extrusion, equipped with ACE Pro: Anycubic's own 4-spool multi-color system. Unlike enclosed CoreXY machines, the open chamber makes it forgiving for PLA and PETG but limits work with ABS and ASA due to warping concerns. The ACE Pro stores spools in a separate hub with a buffer zone and feeds them to the direct-drive extruder on demand: the process is automated, but moisture management for PLA deserves attention since drying within the ACE hub itself is limited. The machine targets hobbyists and educators who want multi-color prints at an accessible price without investing in an enclosed CoreXY platform.
Technical specifications
| Technology | FDM (Bedslinger, open frame) |
|---|---|
| Build volume | 250 × 250 × 260 mm |
| Maximum speed | up to 300 mm/s (real-world); 600 mm/s advertised |
| Extruder | direct drive |
| Calibration | automatic bed leveling |
| Multi-material | ACE Pro, up to 4 spools (multi-color) |
| Class / Price | Hobby · ~€500 |
Who it’s for
- Rapid prototyping with multi-color visualization (form and fit-check iterations with automatic switching between up to 4 colors via ACE Pro) no manual intervention (Industrial Design)
- Education and STEM: teaching additive manufacturing principles and multi-color FDM processes in classroom or workshop settings (Education)
- Functional jigs and fixtures: low-volume manufacturing aids from PLA and PETG, with visual coding enabled by ACE Pro multi-color capability (Manufacturing)
Calibration step by step
- Clean the PEI build plate thoroughly with isopropyl alcohol (IPA). An oil-free surface ensures optimal first-layer adhesion and prevents the print from detaching.
- Run the automated bed leveling sequence. A consistent distance is established between the nozzle and the build surface across all coordinates.
- Fine-tune the Z-offset dynamically during the first layer print. The filament is correctly squished onto the bed without causing an elephant's foot defect.
- Calibrate E-steps and print a Flow Tower to adjust the extrusion flow multiplier. Smooth outer walls with no signs of under-extrusion gaps or over-extrusion blobs.
Common defects and fixes
Recommended settings by material
Pick a material to see the recommended temperatures (empirical ranges from 561 OrcaSlicer/Bambu profiles) plus machine-specific tips:
Conclusion
The Kobra 3 Combo is a compelling choice for hobbyists and educators who want multi-color FDM printing without paying for an enclosed CoreXY machine. The 4-spool ACE Pro system and direct-drive extruder make multi-color PLA and PETG prints accessible and reliable. However, the open frame sets real limits: ABS and ASA require an improvised enclosure, and CF materials present a serious challenge. If you work primarily with PLA, PETG and TPU and want multi-color results at a reasonable price: the Kobra 3 Combo delivers.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert
