When Sterling Backus and his son Xander first showed their 3D printed Lamborghini Aventador, the maker world took it for a publicity stunt. But the build was no loud promise. It was a real project spanning more than 3 years that ended in a fully functional car. The story is one of the best demonstrations of what a single maker can achieve with a home FDM printer.
CAD modeling
Xander modeled every panel in Fusion 360 from reference photographs. An accurate Aventador SVJ at 1:1 scale. Scissor doors, headlights, spoiler, everything.
Printing on two FDM machines
Complex panels measuring 500×500×500 mm were split into segments that fit a standard build volume. The printers ran in parallel, 24/7, with PLA and ABS filament.
The body structure
It is not entirely 3D printed. A carbon frame carries 3D printed panels on top. A hybrid approach. That makes sense: only the panels make the car “3D printed”.
A real engine
An LS1 engine from a Corvette (V8, 5.7 liters), not 3D printed. It sends 430 horsepower to the rear wheels through a reworked Porsche gearbox.
Assembled at home
The whole process happened in the family workshop. No CNC, no waterjet cutting, no professional manufacturing. Pure garage execution.
It drives
This is not a static prop. It drives on Texas roads, registered and street legal. Lamborghini sent people to see it and lent the father a real Aventador SVJ for the day.
Which printer did they use
Nothing professional. The family worked with a Creality Ender 3 and an Anycubic Mega, entry-level FDM printers at €200 to €300 each. It proves the hardware is not the limit; patience and design quality are.
Lessons from the project
Size is not a constraint
Segmented design produced a 5 m car from a printer with a 250×250 mm bed. Always think modular.
Post-processing is critical
Sanding, filling, priming, painting. Without post-processing the parts showed visible layer lines. Over 50% of the total time went into work after printing.
Time is the investment
Over 2,000 hours of printing plus assembly. Not for the impatient, but the result is a unique experience and thousands of followers online.
Community support
A YouTube channel followed the project from day one. Feedback from the community helped with CAD corrections, material choices and problem solving.
What comes next
After the Aventador, father and son started on Ferrari Daytona SP3, an even more complex design. Completion is expected in 2027. Look up their channel “Lambo by Bakus” on YouTube.
What this means for you
If a single maker with two €200 printers can build a car, what is really stopping you from building your big project? Project planner will help you structure a large 3D printed project, from concept to delivery. And The Big Book of 3D Printing gives you the full picture of the technology.
The full picture
This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.
Read it on Kindle →Engineer, author of The Big Book of 3D Printing and additive manufacturing expert