Skip to content Skip to content
EduFacturing
Printers

Form 3L – Specs and Settings

Form 3L – Specs and Settings

The Form 3L is a large-format SLA printer by Formlabs using Low Force Stereolithography (LFS) technology and two laser modules that deliver precise, uniform curing across a 335 × 200 × 300 mm build volume. Its closed ecosystem – PreForm software, Formlabs resins, Form Wash L and Form Cure L – eliminates manual tuning and enables production of large, high-accuracy parts straight out of the box.

What it is

The Form 3L uses LFS (Low Force Stereolithography) – an evolution of classic SLA in which a flexible membrane between the resin and the light engine reduces the peel forces during printing. Two 250 mW lasers operate simultaneously to cover the entire large build volume while maintaining constant accuracy and resolution even for large parts. A closed cartridge system for resins automates loading and material changes, and the in-house slicer PreForm automatically places supports and optimizes part orientation. The printer targets engineers, dental and medical professionals, and manufacturing teams that need functional prototypes, tooling and large parts with accuracy comparable to the desktop Form 3.

Technical specifications

TechnologySLA – LFS (Low Force Stereolithography), 2 laser modules
Build volume335 × 200 × 300 mm (large format)
Laser power2 × 250 mW (continuous, UV 405 nm)
XY resolution25 µm (laser spot size)
Layer thickness25 – 300 µm (resin-dependent)
Material systemclosed cartridge system (Formlabs resins)
SlicerPreForm (automatic support generation, orientation)
Class / PriceIndustrial · ~€8 500

Applications and industries

  • Large functional prototypes – Full-size product prototypes (housings, covers, medical devices) with SLA surface quality and 25 µm accuracy – without splitting the model into sections. (Industrial design and R&D)
  • Manufacturing tooling and fixtures – Assembly jigs, inspection templates and fixtures made from engineering resins (Tough 2000, Rigid) with repeatable accuracy across production runs. (Automotive and aerospace)
  • Large dental and medical parts – Full-size dental bases, surgical guides and orthodontic appliances in series – Formlabs offers biocompatible, sterilizable FDA-cleared resins for the Form 3L. (Dental medicine and healthcare)

Production workflow

  1. Open PreForm, import the model and let the automatic support placement and orientation optimization run. Optimized orientation and supports that minimize resin use and support marks on critical surfaces.
  2. Send the job to the printer; the LFS flexible membrane and both lasers start simultaneously for uniform curing across the full volume. Low peel forces – the part does not warp, and both lasers ensure consistent XY accuracy across the entire build volume.
  3. Remove the build platform with the printed part and transfer to the Form Wash L; wash in IPA for the resin-recommended time. Removal of residual uncured resin from all surfaces and support channels.
  4. Place the part in the Form Cure L and apply the PreForm-recommended post-cure cycle (temperature + UV). Complete mechanical and chemical post-curing – the part reaches the declared mechanical properties of the resin.

Key considerations

Closed ecosystem / cartridge system – The Form 3L operates exclusively with official Formlabs resins – using third-party resins risks both warranty and quality.Budget for Formlabs cartridges (€50 – 300 / l depending on resin). Explore the Formlabs library: Grey Pro, Tough 2000, Rigid and Draft for different needs.
Mandatory wash and post-cure for large format – Large parts retain significantly more uncured resin in deep pockets and channels after removal – skipping the wash step compromises mechanical properties.Use the Form Wash L with the PreForm-recommended IPA cycle and Form Cure L for UV + thermal post-cure; never skip post-curing with engineering resins.
Support marks – SLA supports leave marks (points or small craters) on the surface when removed, especially visible on smooth facing surfaces.Orient the part in PreForm so critical surfaces face upward and receive minimal supports; use Fine Detail Resin or Grey Pro for visible surfaces.
High consumable cost – Under production loads, the cost of resin (especially engineering variants) and IPA for the Form Wash L result in a high cost per printed volume compared to FDM.Optimize orientation and orient hollow parts; drain cartridges fully and recycle IPA (Formlabs offers an IPA Recovery Station).

Materials and applications

Pick a material/alloy this machine processes to see its properties and typical applications:

↑ Pick a material
Properties
Applications

Conclusion

The Form 3L is the right choice when a task demands SLA accuracy at large scale – without compromising resolution or splitting the model. The closed PreForm + Formlabs resin ecosystem means higher consumable cost, but also predictable quality with minimal manual intervention. The machine excels in dental, medical and industrial prototyping workflows where large-part accuracy is critical.

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).