Skip to content Skip to content
EduFacturing
Printers

Saturn 3 Ultra – Specs and Settings

Saturn 3 Ultra – Specs and Settings

The Elegoo Saturn 3 Ultra is a large-format MSLA (mono LCD) resin printer in the prosumer class, featuring 12K resolution, a 218.88 × 122.88 × 260 mm build volume and a 10-inch monochrome display. Targeting enthusiasts and small studios, it combines high detail with a wide print area: a rare combination for a machine under €400.

What it is

The Saturn 3 Ultra uses masked stereolithography (MSLA): a powerful UV LED array exposes an entire layer at once while the monochrome LCD masks precisely which pixels polymerise. The result is a dramatically faster process than SLA (laser) while retaining sub-20 µm precision. The 12K resolution (11520 × 6480 pixels) yields a pixel size of 19 µm in X and 19 µm in Y: sufficient for final-detail miniatures, dental models and jewellery. The machine is aimed at users who want a larger print area without sacrificing the detail that smaller MSLA printers are known for.

Technical specifications

TechnologyMSLA (Mono LCD / 12K)
Build volume218.88 × 122.88 × 260 mm
Display resolution11520 × 6480 px (12K)
Display10-inch monochrome LCD
XY pixel size19 µm
Z layer thickness0.01 – 0.2 mm
Class / PriceProsumer · ~€370

Who it’s for

  • Detailed figurines and miniatures: The 19 µm pixel enables face features, scales and armour at museum-grade detail; the large bed fits an entire warband in a single run (Hobby, tabletop gaming and collectibles)
  • Dental models and aligners: High accuracy and compatibility with biocompatible resins for orthodontic models, crowns and dental aligners (Dental)
  • Jewellery and wax prototypes: Castable wax and standard resins deliver precise master models for lost-wax casting and silicone moulding (Jewellery and arts)
  • High-accuracy engineering prototypes: ABS-like and nylon-type resins with 0.1 mm features for functional form-and-fit checks before injection moulding (Product design and R&D)

Setup and calibration

  1. Inspect the FEP film and gently wipe off any residual resin with a soft cloth. A clear and flat film free of contamination: ensuring correct layer peel on every exposure.
  2. Level the build plate manually with a paper test or use the built-in Auto-Leveling function. Uniform gap between the plate and FEP across the full area: critical for first-layer adhesion.
  3. Run a Resin Exposure Test (e.g. AmeraLabs Town or Calibration Matrix) for the current resin. Finding the optimal Bottom Exposure Time and Normal Exposure Time for the specific resin and temperature.
  4. Adjust the resin level in the VAT: do not fill above the maximum marking. The correct level prevents suction forces and ensures stable peel between layers.

Common defects and fixes

Under-cure (layers are brittle, deformed or incompletely bonded) usually from too short an exposure time or cold resinIncrease Normal Exposure Time in 0.5 s steps; warm the resin to 25–30°C; check that the UV LED array is clean.
Over-cure: loss of fine details, filled-in holes and thickened walls from excessive UV doseReduce Normal Exposure Time; if the issue is only with small holes, reduce Anti-Aliasing strength.
FEP adhesion failure (the model detaches from the build plate and adheres to the FEP film) from poor levelling, damaged FEP or excessive bottom layersClean or replace the FEP; verify levelling; increase Bottom Exposure Time and the Bottom Layers count.
Suction cupping: vacuum forms under enclosed flat surfaces during platform lift, warping or breaking the modelAdd drain holes to the model in the slicer; increase Lift Speed and Lift Distance in the print settings.

Resin exposure helper

Pick a resin type for starting exposure values (typical for mono-LCD machines). These are STARTING points: always run an exposure test, because the exact seconds depend on your screen power and the specific resin:

↑ Pick a resin type
Layer cure
Bottom cure
Bottom layers
⚠ Starting values. Print an exposure test (e.g. Cones of Calibration / R_E_R_F) to dial them in for your resin.

Conclusion

The Saturn 3 Ultra is a hard-to-beat choice in the large-format hobby resin segment: its 12K resolution and 19 µm pixel make it competitive with pricier machines, while the build volume enables ambitious projects, from full dioramas to batches of dental models. The main attention should go to correct calibration, fresh resins and FEP film maintenance.

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).