Skip to content Skip to content
EduFacturing
Printers

Pro3 Plus – Full Review, Specs and Settings

Pro3 Plus – Full Review, Specs and Settings

The Raise3D Pro3 Plus is an enclosed industrial FDM printer with an IDEX (Independent Dual EXtruder) system and an exceptionally large build volume: 300×300×605 mm. The two independent extruders allow simultaneous printing of structural and soluble support material, while the enclosed chamber ensures a stable thermal environment for demanding engineering polymers in small-series production.

What it is

The Pro3 Plus is the large-format version of the Pro3: it retains the identical IDEX architecture and enclosed chamber but doubles the Z-travel to 605 mm, making it the preferred machine for tall vertical parts. "Plus" does not mean more powerful extruders; it means a substantially larger build envelope along the vertical axis. Designed for production environments: robust all-metal frame, active thermal chamber, direct ideaMaker integration and native support for soluble supports (PVA, HIPS), the standard for IDEX platforms. The printer targets engineers and manufacturers who need repeatability, large volume and complex geometry within a single print cycle.

Technical specifications

TechnologyFDM IDEX (two independent extruders)
Build volume300 × 300 × 605 mm
Extrusion systemDual Direct-Drive (2 independent carriages)
ChamberFully enclosed, actively heated
Calibrationautomatic leveling + IDEX X-offset calibration
SoftwareideaMaker (Raise3D)
Class / PriceIndustrial · ~€9 500

Applications and industries

  • Tall functional parts: production of tall vertical components: housings, ducts, structural profiles: up to 605 mm in Z without splitting the part (Mechanical engineering and aerospace)
  • Tooling with soluble supports: complex jigs and fixtures with built-in support geometry from PVA or HIPS, removable without mechanical intervention (Automotive and manufacturing tooling)
  • Small-series dual-material production: serial production of 1–100 parts in two materials simultaneously: structural polymer + soluble support, for reproducible quality (Medical devices and consumer products)

Production workflow

  1. Clean the PEI/glass build plate with isopropyl alcohol (IPA). A clean, grease-free surface ensures maximum first-layer adhesion without detachment.
  2. Run the automatic bed leveling routine from ideaMaker. Precise surface mesh: constant nozzle-to-bed gap across the full 300×300 mm area.
  3. Calibrate the X-offset between the two IDEX carriages. Perfect alignment of both extruders at material changeover: no offset or double lines.
  4. Verify Z-offset and Pressure Advance for each of the two extruders. Optimized flow and precise line start/end: no blobs or under-extrusion on switching.
  5. Print a test object with PVA/HIPS support and verify dissolution. Dissolved support reveals a clean surface without mechanical marks: ready for production cycle.

Key considerations

Anisotropy (layer-direction strength) (FDM parts are significantly weaker along the Z-axis than XY) critical for tall vertical parts up to 605 mmOrient the part so loads are primarily in XY; use CF-Nylon or PC for better layer adhesion; increase chamber temperature.
IDEX extruder misalignment: insufficient X-offset calibration causes the two extruders to leave offset marks or duplicate lines at material boundariesRepeat the IDEX X-offset calibration in ideaMaker, print a calibration tower and fine-tune the offset in 0.05 mm steps.
Long print time for tall Z height (parts near 605 mm Z require dozens of hours of continuous printing) the risk of interruption grows linearlyEnable Power Loss Recovery in ideaMaker; provide stable power (UPS); split the model into sections if design allows.
Wrong support material choice: HIPS dissolves in limonene, PVA in water; mixing them or incompatible temperature pairings destroys the part or leaves undissolved residueMatch material to solvent: PLA+PVA (water), ABS+HIPS (limonene); never mix solvents; dry both PVA and HIPS before printing.

Materials and applications

Pick a material/alloy this machine processes to see its properties and typical applications:

↑ Pick a material
Properties
Applications

Conclusion

The Pro3 Plus is the choice for an engineering team that needs one thing: maximum Z-volume with IDEX reliability. The enclosed chamber, two independent extruders and deep ideaMaker integration make it ready for serial cycles with soluble supports and demanding materials. Distinguish it from the Pro3 by the single defining parameter (605 mm Z versus 300 mm) and by purpose: the Pro3 is a generalist; the Pro3 Plus is a specialist for tall vertical parts and complex dual-material geometry.

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).