Skip to content Skip to content
EduFacturing
Comparisons

Formlabs Fuse 1+ vs Sinterit Lisa Pro – Desktop SLS Comparison

Formlabs Fuse 1+ vs Sinterit Lisa Pro – Desktop SLS Comparison

This is the desktop SLS comparison. Formlabs Fuse 1+ 30W (€20,000) and Sinterit Lisa Pro (€18,000) are the two leading desktop SLS printers for hobbyists+ and small business in 2026. The comparison matters for companies that want in-house SLS capability without commitment to €100K+ industrial machines. Both work with PA12 powder and offer similar build volume, but have different philosophies: Fuse 1+ is an integrated workflow from one producer, Lisa Pro is more open / DIY-friendly. This comparison: who fits which use case.

Spec breakdown

Price: Fuse 1+ 30W €20,000 vs Lisa Pro €18,000. Lisa -€2000.

Build volume: Fuse 1+ 165×165×300mm = 8.2 liters. Lisa Pro 150×200×260mm = 7.8 liters. Fuse +5%.

Laser power: Fuse 1+ 30W fiber laser. Lisa Pro 5W laser. Fuse 6x faster layer scan.

Layer height: Fuse 1+ 0.10mm. Lisa Pro 0.075-0.175mm. Lisa more flexible.

Materials supported: Fuse 1+ PA12, PA11, TPU, glass-filled PA12 (5 official Formlabs powders). Lisa Pro: PA12, TPE, Flexa flexible, glass-filled PA, PA11 (5+ official Sinterit + third-party). Lisa slightly more diverse.

Post-processing: Fuse 1+ ships with required Sift station (€10,000) and Form Cure L (€2000). Lisa Pro: Sandblaster station included in price. Lisa total package cheaper.

Maintenance: Fuse 1+ laser-only mechanical wear; standard 3-year service contract. Lisa Pro: simpler mechanism, less maintenance.

Total Fuse 1+ setup: €30,000-€35,000 (printer + Sift + Cure + materials). Total Lisa Pro setup: €22,000-€26,000.

Build speed (medium batch 50 small parts):

  • Fuse 1+ 30W: 8-10 hours
  • Lisa Pro: 14-18 hours
  • Fuse ~50% faster

Workflow comparison

Fuse 1+ workflow:

  1. Design in CAD, export STL.
  2. Slice in Formlabs PreForm (free, integrated with Fuse).
  3. Send to printer via cable or USB.
  4. Print (8-14 hours typical).
  5. Remove powder cake, transfer to Sift station.
  6. Sift station automatically separates parts from unused powder.
  7. Recover ~80% of unused powder for next print (recyclable).
  8. Sandblast parts in built-in cabinet.
  9. Optional dye/coat.
  10. Ready for use.

Total hands-on time per batch: 1-2 hours active labor.

Lisa Pro workflow:

  1. Design in CAD, export STL.
  2. Slice in Sinterit Studio (proprietary, free with printer).
  3. Send to printer via USB.
  4. Print (14-20 hours typical).
  5. Wait for cooldown (4-6 hours after print: slower than Fuse).
  6. Manually transfer powder cake to Sandblaster.
  7. Sift unused powder (manual sieve included).
  8. Recover ~75% of powder.
  9. Sandblast parts.
  10. Ready.

Total hands-on time: 2-3 hours active labor (more manual transfers).

For 10 prints/month: Fuse 1+ saves 10-15 hours/month of labor. For 50 prints/month: Fuse 1+ saves 50-75 hours/month, significant for high-volume production.

Material cost per part

Fuse 1+ material economics:

  • PA12 powder: €120/kg (Formlabs Nylon 12)
  • Powder refresh rate: 70% reused / 30% fresh per build
  • Effective cost per kg printed: ~€36 (after recycling)
  • Typical small part (30g): €1.08 material
  • Plus amortization (€20,000 / 5 years / 30 prints/week × 1 part): €1
  • Per-part total: €2-€4 for small parts.

Lisa Pro material economics:

  • PA12 powder: €100/kg (Sinterit PA12 Smooth)
  • Powder refresh rate: 65% reused / 35% fresh
  • Effective cost per kg printed: ~€35
  • Small part (30g): €1.05
  • Plus amortization: €0.80 (cheaper printer)
  • Per-part total: €2-€4 also.

Long-term comparison (1000 small parts/year): Fuse 1+ total: €3000-€4000 Lisa Pro total: €2800-€3800 Lisa Pro saves €200-€400/year

But Fuse 1+ enables higher throughput: possible to do 2000-3000 parts/year with same hardware vs Lisa’s 1500-2000 maximum. So Fuse 1+ better for high-volume scaling, Lisa Pro better for medium-volume cost optimization.

Build quality + reliability

Fuse 1+:

  • Formlabs build quality is industry-leading
  • Closed system: less customization, more reliability
  • 3-year standard warranty
  • Optional 5-year extended (€2500)
  • Service network: Formlabs partners in EU (Austria, Germany, Italy)
  • On-site service available for critical customers (production studios)
  • Documented MTBF: ~3000 print hours before service call needed

Lisa Pro:

  • Polish manufacturer Sinterit, smaller scale but reputable
  • More serviceable design: replace components easier than Formlabs
  • 2-year standard warranty
  • Extended warranty +€1500/year
  • Service network: smaller, mostly Sinterit direct from Poland
  • Some on-site service in EU (Germany, France) via partners
  • MTBF: similar 2500-3000 hours

For production studios doing 24/7: Fuse 1+ slightly better backed by larger service network. For small business doing weekday hours only: Lisa Pro equivalent reliability.

Noise level: Fuse 1+ 60dB during print. Lisa Pro 55dB. Both can be in office room without disruption (a normal conversation is 60dB).

Verdict

Choose Formlabs Fuse 1+ if:

  • Production volume above 50 parts/month
  • Need fastest possible turnaround (50% faster builds)
  • Want Formlabs integrated ecosystem (Form 4 SLA already?)
  • Have €30K+ total budget
  • Plan to scale (Fuse better for growth)
  • Need US/EU service network availability

Choose Sinterit Lisa Pro if:

  • Budget constrained (€22K vs €30K)
  • Medium production (20-50 parts/month)
  • Like more material flexibility (TPE, Flexa)
  • Prefer European manufacturer (Polish)
  • Slightly slower speed acceptable
  • More DIY/serviceable preferred over closed system

Not recommended either if:

  • Production volume < 20 parts/month (outsource to bureau cheaper)
  • Above 200 parts/month: go industrial SLS (EOS, 3D Systems)
  • Need certified medical material: neither fully validated for medical implants

For most small businesses entering desktop SLS: Lisa Pro better starting point (€8K less). Upgrade to Fuse 1+ when volume justifies.

For existing Formlabs Form users adding SLS capability: Fuse 1+ for ecosystem continuity.

Frequently Asked Questions (FAQ)

Q: Does Fuse 1+ or Lisa Pro fully replace outsourced SLS?
A:
For small/medium volume (20-100 parts/month): yes, ROI better in-house. Above 100/month, dedicated industrial SLS justified. Below 20/month, outsource bureau (Sculpteo, etc.): pay €15-€30/part on-demand, no setup cost.
Q: Can I print TPU on Fuse 1+ or Lisa Pro?
A:
Lisa Pro YES (Flexa flexible powder). Fuse 1+ NO in official material list. For TPU-like flexibility on Fuse, use Formlabs Nylon 11 (slightly flexible). For real TPU SLS: Lisa Pro or outsource HP MJF TPU.
Q: Setup space requirements?
A:
Fuse 1+ + Sift + Cure: ~6 m² floor space (printer + 2 stations + storage). Lisa Pro + Sandblaster: ~3 m² (more integrated). For Sofia studio: Lisa Pro fits in smaller office. Fuse 1+ needs dedicated workspace.
Q: Resale value?
A:
Fuse 1+ retains 50-60% value after 3 years (€10K-€12K used). Lisa Pro 45-55% (€8K-€10K used). Both have active second-hand market in Europe. Higher value Fuse 1+ because larger user base, more service availability.

Formlabs Fuse 1+ Vs Sinterit Lisa Pro, Desktop Sls Comparison Calculator

Interactive optimization calculator.

Optimal Value
0.00

The full picture

This article is one page from The Big Book of 3D Printing: 704 illustrated pages covering every technology, material and fix in one reference.

Read it on Kindle →

Engineer, author of The Big Book of 3D Printing and additive manufacturing expert

We use cookies. Essential ones make the site work.

Want Google's AI to give you accurate 3D-printing answers? Add EduFacturing as a Preferred Source (opens Google, add “edufacturing.com”).